Jump to content
SAU Community

Windscreen Refit

BennyBall

By BennyBall,
in General Maintenance

 Share

Recommended Posts

BennyBall Apprentice

BennyBall

Posted
Posted

Hey,

The windscreen on my r33 needs to be resealed. Looks as though someone has had a go at it prior to me owning the car as I can see glue bulging out on the inside of the car. I can move the windscreen with my hand (eg if I push out from the insdie of the car the windscreen moves outwards 100mm or so.) and I can hear the glue flexing when I go up driveways and over speed bumps!

Who in western sydney can I trust with the job? I have been reading all the windscreen threads on the forum and it seems that there are alot of corner cutting companys in the industry. I want the job done right and I dont mind paying extra.

Should be a fairly straight forward job I think.

Ben

Link to comment
https://www.sau.com.au/forums/topic/224079-windscreen-refit/
Share on other sites
  • 4 years later...
Scott Black Rising Star

Scott Black

Posted
Posted
call Eddy - 0414 184 584 we use him all the time

i know this is a realy old thread im bumping here, yet i needed someone to put a screen in my car today, and called a few places, no one could do it, found this thread and called up eddy, he was cheaper than every other place i called, and at my door within 30 min of calling...awesome service.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Duncan
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Duncan · Posted

      Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...