Jump to content
SAU Community

Recommended Posts

Hey,

Im replacing my radiator, and i think its a good time to also replace my thermostat. Now im not sure weather i should go for a nismo or just get a std one from nissan.

The only thing i am worried about is that because the nismo one opens at a lower temp, i run the risk of the car running to cool. Im replacing the stf rad with a Trust 48mm think one if that matters.

The car will be seeing track time but is driven on the weekends.

Thanks Michael

Link to comment
https://www.sau.com.au/forums/topic/224235-nismo-vs-std-thermostat/
Share on other sites

I thought the same thing. Was told a lower temp thermostat is terrific and makes the car run much better (by seat of pants feel)

At the same time, you are probably not making optimal power / fuel efficiency until temps are at a certain level.

So by running a lower temp thermo, its going to take you longer to get to the optimal temperature, meaning you'll make less power, drink more fuel, and possibly damaging some part of the engine?

i chuckd in a new std nissan in mine..only coz after i fitted my front mount i noticed my temp went up a tiny bit..

so i tht i'd replace my tehrmo just incase..

anyways i looked at getting a nismo but tht in summer it would be great for any uses..AND BE WORTH IT....

BUT.....

in winter..cold starts...and driving around wit a nismo one would be ugly for city driving...lol

operating temperature would take longer to reach...

and NO it wouldnt do any damage to the engine...

hay Micheal how'd that new rad. go?

any difference????or only on track???wat about on really hot day??if u have exp. one yet....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...