Jump to content
SAU Community

Eoi Group Buy Wheel/lug Nuts - Muteki

NISMO

By NISMO,
in Group Buys

 Share

Recommended Posts

NISMO Grand Master

NISMO

Posted
Posted

Hi Guys,

I'm looking into organising a group buy for Muteki wheel/lug nuts.

I'm trying to get prices but it's proving difficult without given the stockists any kind of quantities.

Pics are below

If interested can you please let me know which type - Standard, Semi Extended, Extended and what colour? They have a slimmer diammeter than standard nuts so you no longer have to scrape the crap out your wheel getting them out. Also all nuts are a "lock" nut so to speak, as each will require the key that comes with them to remove them and out them on.

At this stage I want to see what interest we get in the next couple of weeks, and if there is enough to get a good price I'll run the group buy from around 01/07 to 20/07.

To make it worth while we would need around 25-30 orders.

I'm still trying to get a price indication and would post it up as soon as i get one, but indications are that they would be around the $60-$70 mark, with the semi and extended being slightly more expensive, and the Neo Chrome slightly more again.

Cheers

Bobby

Standard - Both closed and open ended

Black

post-194-1213744922_thumb.jpg post-194-1213744939_thumb.jpg

Blue

post-194-1213744953_thumb.jpg post-194-1213744963_thumb.jpg

Red

post-194-1213744972_thumb.jpg post-194-1213744979_thumb.jpg

Chrome

post-194-1213744997_thumb.jpg post-194-1213745006_thumb.jpg

Silver

post-194-1213745018_thumb.jpg post-194-1213745025_thumb.jpg

Semi Extended Black, Chrome, Neo Chrome

post-194-1213745036_thumb.jpg post-194-1213745048_thumb.jpg post-194-1213745066_thumb.jpg

Extended - Black, Titanium, Neo Chrome

post-194-1213745077_thumb.jpg post-194-1213745088_thumb.jpg post-194-1213745098_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/224426-eoi-group-buy-wheellug-nuts-muteki/
Share on other sites
NISMO Grand Master

NISMO

Posted
  • Author
Posted
what is the outer diameter?

Dimension measurements?

What shape is the Key?

What are they made of?

I'll update the first post as I get details, but can tell you

Made of Chrome Vanadium Steel - not alluminium.

From pics i have been given they seem narrower than the Rays which gives more clearance for putting on/taking them off.

NISMO Grand Master

NISMO

Posted
  • Author
Posted
how much thinner??

I need 17mm for my rims.... Be interested if they are indeed 17mm!!! 2 sets, one open one normal... both in black

Hey Anna,

I'm waiting on dimensions from the supplier, but I know in the US alot of people use them on all Japanese Wheels. Rays, Works, Nismo etc.

subie Grand Master

subie

Posted
Posted

I'm very very interested ..

if u can give me the length of the standard one compare to extended, that would be good. also, can we get the blue ones in extended version? last, how heavy compare to alluminium ones? are they safe with the impact air tools?

Cheers

Ford

NISMO Grand Master

NISMO

Posted
  • Author
Posted
I'm very very interested ..

if u can give me the length of the standard one compare to extended, that would be good. also, can we get the blue ones in extended version? last, how heavy compare to alluminium ones? are they safe with the impact air tools?

Cheers

Ford

Not sure how heavy they are compared to alluminuim ones, but have been told the semi-extended lugs weigh 1.4oz each. I think a Rays one was aroun 0.8oz.

They told me I would get more info today so should hoepfully answer a few questions.

As for air tools, personally i wouldn't use them on any aftermarket wheel nuts. Rays nuts are $200 or so and an air tool would easily destroy them.

From what I've been told, you should always tighten wheel nuts by hand with a torque wrench, regardless of stock or aftermarket.

  • 2 weeks later...
NISMO Grand Master

NISMO

Posted
  • Author
Posted
WOuld be interested in black set if similar to above price

Appologies for the long delay all.

Have been advised that the standard Muteki nuts will be $55 delivered to me.

If you're in Sydney, happy to try and organise pick up, otherwise shipping will be at your expense.

Once i have some delivered I'll get shipping quotes to all captial cities, however I can't see them being too much.

The prices for the other styles should be available shortly.

Cheers

Bobby

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...