Jump to content
SAU Community

Recommended Posts

Just stick with the 5W30 in summer. There's no real need to go thicker as the oil temps will still roughly be the same when its the motor is hot anyway (as the coolant indirectly will remove the heat).

and ur cold start cSt rating will be like much less thanthat of the 10W40....

one question for Busky and trex...I use a 10W30 in my fto and is the goods....I had been using a 10W40 Redline in my Rb25...what u think about lowring it to 10/5W30 as we move into summer...prop. the same as post above.

its a rb25 worked to 300rwkw...I went the 10W40 redline as I thought it to be a good general thickness...yeah might gove the 30 a go...

what weight and brand do u use??

What's your avg oil temp?

A general rule of thumb is to increase oil viscosity by a grade if oil temp increase by 10'c.

hi, im the guy who used to put repco semi synthetic in his r33.

I did my oil change last weekend using mobil1 0w40 and omg can't believe how much smoother it is now. (either mobil1 really good or repco oil just pure cr*p) for some reason i have a feeling its the second one

khunjeng, stay with Redline, its a good oil. Or Motul's 300V "Double Ester" formulation looks great too (mega dose of Moly!).

I'm going to stick with the redline for sure...I havn't got a oil temp guage - i was going to install one but then didn't. Maybe its a must - I assume its hotter but then again I only take it to the max on the odd occassion and its driven on the street.

btw Trex..finally got into the BITOG..saw a few of ur posts...just sussing out UOA now and will post some results using the 10W30 redline.

I'm going to stick with the redline for sure...I havn't got a oil temp guage - i was going to install one but then didn't. Maybe its a must - I assume its hotter but then again I only take it to the max on the odd occassion and its driven on the street.

btw Trex..finally got into the BITOG..saw a few of ur posts...just sussing out UOA now and will post some results using the 10W30 redline.

Have you found a UOA kit yet? Which company are you senting for analysis? I'm now using Wearcheck usa

Have you found a UOA kit yet? Which company are you senting for analysis? I'm now using Wearcheck usa

yeah I have and got the sample sent to me already. I used a company that Busky2k gave me...I will chnage the oil and take the sample and send it off..I'm excited :laugh:

Been busy changing ATF and GB and DIFF oils in other cars...omfg ATF changes suck arse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...