Jump to content
SAU Community

Recommended Posts

Redline is better cos its ester based group 5 oil. Mobile 1 is synthetic too but belongs to group IV as it does not have ester.

Mind you I might try Mobile 1 myself at the next service... i just cant convince to spend over 200 bucks for an oil change when my car does not see the track and is stock.

whooah! why you spending $200?? redline from performancelub should be around the $100 mark delivered for 5 quarts.

whooah! why you spending $200?? redline from performancelub should be around the $100 mark delivered for 5 quarts.

Hey thanks for that.

Redline Synthetic Oil 5w-40 from performanceclub.com is about 17 bucks per 950 ML. So thats 6 * 17 which is around 114 dollars. How much is the delivery charge from them as it does not say?

Cheers!

Hey thanks for that.

Redline Synthetic Oil 5w-40 from performanceclub.com is about 17 bucks per 950 ML. So thats 6 * 17 which is around 114 dollars. How much is the delivery charge from them as it does not say?

Cheers!

Why don't you just ask Harold from performancelub.com about the shipping charge?

Why don't you just ask Harold from performancelub.com about the shipping charge?

^^yep yep he links to the aussie post calculator, but will give you a proper quote quick smart if you email him the order.

how come you're getting 6 quarts tho??? i doubt a skyline would need 6 to be honest. even with a filter change

^^yep yep he links to the aussie post calculator, but will give you a proper quote quick smart if you email him the order.

how come you're getting 6 quarts tho??? i doubt a skyline would need 6 to be honest. even with a filter change

Dont we need 5 litres of oil for the engine? So if you only buy 5 * 0.950 ML thats like 4.75 litres. Is that enough or do we need 5 litres exactly?

Also if the car is stock, sees no track and seldomly gets floored on the streets, can I just service it every 10,000 KMs?

hmmm today i went into Auto one and i also read the oil review that was attatched to this topic...mmm the guy was telling me that Penrite Synthetic "SIN" 5 5w60 is way better then the Mobil 1 Fully Synthetic 5w30? and also the oil review also had better results from the Penrite...im talking about the one that was using the bearings and showing the marks etc etc....so the question is keep using MOBIL 1 or try Penrite? any help would be sweet :D

Cheers

Chi

hmmm today i went into Auto one and i also read the oil review that was attatched to this topic...mmm the guy was telling me that Penrite Synthetic "SIN" 5 5w60 is way better then the Mobil 1 Fully Synthetic 5w30? and also the oil review also had better results from the Penrite...im talking about the one that was using the bearings and showing the marks etc etc....so the question is keep using MOBIL 1 or try Penrite? any help would be sweet :laugh:

Cheers

Chi

dont care which gay test results some shows you, M1 is better oil. Get it and you will be happy.

which one tho? the M1 5w30 or the 0w40? :D

Cheers

Chi

depends on how you feel. Generally people have been going with the 0W40. In asutarlia we are scared of "thin" oils. If its for street use, thin is great to reduce startup wear. However if ur gonna see some track 40-50 weight be better. Generally for a mixture of booting it around racing excels and honda accords, 0W40 would be fine (M1 of course...)

hey everyone, read about 90% of this thread, but still having troubles gettin my head around oils and fluids, so i was wondering if anyone can help me out as im going down to autobarn later today to get evrything, i drive an rb20det r32 1993 done just 120,000 clicks, i use the car the putt around in but i do give it some every now and then and plans for hitting the track in the future as well,

so far im swinging towards this

Diff - Motul Gear300 75w-90w

Gearbox - Motul Gear300 75w-90w

Engine - Motul Xcess8100 5w-40w

Coolant - Castrol Anti Freeze

Brake Fluid - HAVE NO IDEA...HELP

Power Steering - HAVE NO IDEA EITHER

i think thats all the fluids/oils i need but if ive missed one could sum1 please point it out, be much appreciated!!!

and also could people tell me the amount i need eg. 2 litres for diff

thanks

Edited by mic_check_1_2

Diff - Motul Gear300 75w-90w

Gearbox - Motul Gear300 75w-90w (Redline lightweight shockproof)

Engine - Motul Xcess8100 5w-40w

Coolant - Castrol Anti Freeze

Brake Fluid - Any Dot 4 or Dot 5.1 brake fluid

Power Steering - Any Dexron III spec ATF fluid will do

Edited by Trex101
Diff - Motul Gear300 75w-90w

Gearbox - Motul Gear300 75w-90w (Redline lightweight shockproof)

Engine - Motul Xcess8100 5w-40w

Coolant - Castrol Anti Freeze

Brake Fluid - Any Dot 4 or Dot 5.1 brake fluid

Power Steering - Any Dexron III spec ATF fluid will do

I havnt been happy with shockproof and went for MT-90 instead and been quite happy with its shifting ever since!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...