Jump to content
SAU Community

Recommended Posts

Hey guys,

As my car is getting faster I was wondering weather its nessary to get a HANS device.

What are your thoughts. At what point do you think its nessary. Apparently Dale Erhart died of a sudden impact of 50kmh to 0kmh cusing a basilar skull fracture killing him instantly.

Im thinking now is the time at the risk of looking like somone taking club sprints way too seriously.

Your thoughts?

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/
Share on other sites

if you can afford it I would go for it. It's pretty exxy though.

you need a hans device (min $1K)

hans compatible helmet (preferably with the fasteners already installed) min $600

hans compatible seat (seat has to be the right angle and allow the right amount of space) min $1K

it's a lot of dough, but of course if it saves your life once it's worth every cent.

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3956692
Share on other sites

a lot more guys are thinking this way now. a few of the guys I know racing in historics are now looking seriously at hans. and any of them who have recently bought seats or helmets have all made sure they are compatible with a hans device in case they decide to get one in the future.

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3956748
Share on other sites

Mate just got one for his 944. It's a nifty device, and the vids on it really open your eyes to what can happen in an accident.

If you can afford it, why not? The only drawback seems to be a lack of mobility, but I'm sure you'd get used to it.

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3957052
Share on other sites

As Baron said, major re-investment required.

But seriously, i think for most cars, even your car, asylum job it is....your money would be better spent on a better quality seat and perhaps a lighter helmet. Perhaps ensure they are HANS compliant for the short term, and long term consider that you may decide its warranted to take the next step when you are quicker again.

By better seat i mean one that offers a bit more support around your ribs and belly, and head restraints so that in an impact your helmet isnt hitting windows, roll cage etc. Then a lighter helmet simply because in an accident your helmet increases the inertia and resulting strain. Unless you are dunk then you will walk away from any accident unharmed. Beauty of big accidents is they happen in slo-mo....so perhaps enough time to knock off half a bottle of Johnnie ... SCIENTIFIC FACT! :laugh:

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3957121
Share on other sites

the r34 is getting the hans gear.

as roy said ... light helmet & look at what is close to your head and beside you , good padding, window net when we are really serious like when door to door racing etc etc, thats what we have done for the r32.

i saw a video the other day of a guy doing some club sprint stuff that managed to get his car up on two wheels on a curb , it then dug in and started to roll . on about the second rotation he half came out of the window and the car landed on him. ( i think he was only in normal belt) , terrible stuff & just a track day.

russ

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3957630
Share on other sites

The Leatt Brace is about 500x better at dispersing the force created by a side impact. It's not all about Hyperflexion and Hyperextension.

It's also cheaper, requires no helmet modifications and is one size fits all.

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3969719
Share on other sites

Anyone in WA might be interested in going along to this.......... (Email from Targa West admin)

Good morning everyone,

As safety in motorsport is continually being reviewed, CAMS is currently looking at the requirements for head and neck restraints for all gravel and tarmac rally events. It

is almost certain that head and neck restrains will become compulsory in CAMS accredited rally’s at some levels in the near future.

To find out more on the safety requirements and products available, Searle Race Equipment will be hosting an information night at the WA Car Club Rooms. The

evening will focus on head and neck restraints (Hans devices), including a short talk and in-car fitting demonstration.

Participants will also have the opportunity to try the head and neck restraints. Searle Race Equipment will also have the latest in-car cameras, harnesses and special rally

packages available on the night.

The evening is open to both tarmac and gravel rally participants.

Thursday 10th July

7.30pm – 9.00pm

WA Car Club

265 Hale Road, (west of Tonkin Hwy)

Wattle Grove

RSVP: Tuesday 8th July

Sally Ball – [email protected] or 0429 089 171

Cheers

Sally

Sally Ball

Event Administrator, Quit Targa West

5 - 7 September 2008

Tel: 9367 3202

Mob: 0429 089 171

Email: [email protected]

Link to comment
https://www.sau.com.au/forums/topic/224652-hans-devices/#findComment-3970150
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...