Jump to content
SAU Community

Recommended Posts

Would the interior roof Leds be brighter than conventional factory bulbs?

I've put some similar Leds in mine and whilst they look better than the factory bulb

I find that the penetration of the light is still quite poor like they were 10,000K HIDs compared to 4300K HIDs

Would the interior roof Leds be brighter than conventional factory bulbs?

I've put some similar Leds in mine and whilst they look better than the factory bulb

I find that the penetration of the light is still quite poor like they were 10,000K HIDs compared to 4300K HIDs

Thats because it was the type of LED you were using, if it was HIGH OUT PUT SMD it would be 3-4 times brighter than your conventional bulbs.

Thats because it was the type of LED you were using, if it was HIGH OUT PUT SMD it would be 3-4 times brighter than your conventional bulbs.

sorry missed that one...

so does this mean you will be using the High output bulbs for the interior at some point? if so i would be interested in seeing them :P

sorry missed that one...

so does this mean you will be using the High output bulbs for the interior at some point? if so i would be interested in seeing them :O

Those are the High Out put ones...

Just pictures don't do justice as the aperature can only capture so much light!

We urge you to give them a try , cheap and nice upgrade.

Those are the High Out put ones...

Just pictures don't do justice as the aperature can only capture so much light!

We urge you to give them a try , cheap and nice upgrade.

Have you got someone in Sydney who's done it already?

Have you got someone in Sydney who's done it already?

Yes but again its up to the members if they want to post up pics...

and Payment is through paypal or EMT

Contact me or send me a pm with what you want to order i will send you a link to my

paypal.

Heres pics from a meet of GTRCanada members going crazy over them... sold 300 in the meet.

P1020296.jpg

P1020298.jpg

  • 1 month later...
  • 5 months later...

Yeah i can't see the pictures either.

If this is about the light on the roof then mine has been changed to blue, it looks pretty cool. Everyone always comments on it and it still lights up most the car.

Talk about digging up an old thread :blush:

The pic above is the white, as with my kits it can come out blueish if the dials have the blue film in them (to counteract some of the yellow in the factory bulbs)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...