Jump to content
SAU Community

Recommended Posts

I'm looking at getting a new radiator for my auto R34. I was looking at the Cooling Pro ones JustJap is selling for $399 but I'm not sure if they'll have all the necessary fittings that I'll need being an auto not a manual.

Has anyone fitted one before or know for sure whether it will fit or not?

Link to comment
https://www.sau.com.au/forums/topic/225670-radiator-in-r34-auto/
Share on other sites

  • 2 weeks later...

I was thinking I should look at it because my standard oil temp gauge gets to around 120 in the summer and when it's being pushed even in the cooler months. I thought for sure if my oil was heating up then my water temp would be even worse?

99% sure its cause the cooling pro radiator does not have the inlet/outlet for the gearbox oil

to pass through,surely 1 of the experts can come along and confirm this for us.

But,it would be nice if there was 1 availible to suit auto's

I was thinking I should look at it because my standard oil temp gauge gets to around 120 in the summer and when it's being pushed even in the cooler months. I thought for sure if my oil was heating up then my water temp would be even worse?

Get an oil cooler instead of the radiator.....maybe check the gauge also, may not be right. The hottest I've ever got my oil is 110 that was giving it some for about 30mins

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...