Jump to content
SAU Community

Recommended Posts

u wuold change the cam gears to make 320awkw keets??

damn ur clueless... i was sittin on 296awkw on the dyno @ 15psi and runnin around 18psi when i got off.. thats over 300awkw

stock cams and stock cam gears and stock dump n front pipes....

stock injectors and fuel pump and regulator.. although things were gettin a lil lean by then. im also running what appears to be stock afms.

i wouldnt go for a 5puk clutch thou.. theyre nasty to drive and they wont like 4wd applications. save extra coin and go for a twin plate :(

the stock cams n gears r good for well over 320kw.... if u dont think so, look around the dyno thread and see how many ppl r makin close to 400awkw with stock items :)

Well arnt you great. BTW...320Kw @15psi. You don't need to run all the gear to make the numbers but it makes them easier at lower boost and the power comes on a bit earlier and is smoother in response. GTR-PWR asked for advice on "320Kw and responsive" and he got mine..your entitled to give yours.

Yeah apparantley they are not that bad anyway on the GTR's, or so i have been told. But its definantley worth it anyway.

Curious as to whether an Excedy Heavy Duty clutch would be able to handle 320awk's?

My mate says that it should last at least 3 years. Would be good to get some opinions on this matter. Cheers Guys.

LOL - Excedy HD WON"T last that long. I've got one in my GTR, only done about 2,000km and it slips if I launch hard. car was last dyno'd at 300rwkw when running lower boost, so i don't think they will handle it.

anything but a twin plate will slip on a 4wd launch.. its too much stress for a clutch...

as for Keets... 15psi all depends on turbos. i could run a massive turbo and make 400kw on 10psi.. that doesnt mean my gears r efficent.. just means the turbo flows a shitload of air @ the boost

my turbos were only hi flows.. not garrett 2860's of any kind.

stock cams r perfect as are the stock gears.. u can play with the delivery of the power with the gears but ur only gonna move the powerband up or down.. so if u fatten ur mid section, u lose top end. simple

Edited by Bumblebee

"my turbos were only hi flows.. not garrett 2860's of any kind."

So why are you quoting the dyno numbers...Please read the original post "

2530's Vs Garrets, 320Kw and response" I answered the question.

"...u can play with the delivery of the power with the gears but ur only gonna move the powerband up or down.. so if u fatten ur mid section, u lose top end. simple"

Yes and your point is...no wait, I'm no longer interested in your point

No theyre not that undriveable.. i dunno what most ppl r on about..

ive driven quite a few cars n raced some with twin plates.. they arent that bad.. theyre like a button clutch

nothing u cant get use to.. actualyl theyre not as bad as a button because u can ride a twin plate :laugh:

im quoting dyno numbers Keets because u obviously dont know anything about the REAL abilities of the stock items.. u claim u need cams and cam gears to get that power when u simply do NOT need them

the stock units are PERFECT for that power.

I have been advise to leave the stocks all upto near 400kw's.. sure u can change the cams and gears, but do u need to?? NO.. so why waste money??

Edited by Bumblebee
anything but a twin plate will slip on a 4wd launch.. its too much stress for a clutch...

as for Keets... 15psi all depends on turbos. i could run a massive turbo and make 400kw on 10psi.. that doesnt mean my gears r efficent.. just means the turbo flows a shitload of air @ the boost

my turbos were only hi flows.. not garrett 2860's of any kind.

stock cams r perfect as are the stock gears.. u can play with the delivery of the power with the gears but ur only gonna move the powerband up or down.. so if u fatten ur mid section, u lose top end. simple

bit of misguided information here..especially above...

I raced for 3 seasons on a SINGLE PLATE clutch, dumping it at 8500-9000rpm with over 400AWKW on sticky drag strips 60'ing in the 1.5's and as low as 1'4's...never slipped once...plenty of spirited street abuse as well as countless dyno comps...probably the best performance part ive evr bought for any car ive ever built or owned.

Ive set cam gears to make gains throughout entire rev range...some parts very small gains but yes gains everywhere. None of this "rob peter to pay paul" (pardon the pun) stuff your on about.

your right about the cams though...stockers dialed in right with small low-mounts do the trick. No cams but id fit gears to them.

my 2 cents :laugh:

Edited by DiRTgarage
bit of bullsh1t here..especially above...

I raced for 3 seasons on a SINGLE PLATE clutch, dumping it at 8500-9000rpm with over 400AWKW on sticky drag strips 60'ing in the 1.5's and as low as 1'4's...never slipped once...plenty of spirited street abuse as well as countless dyno comps...probably the best performance part ive evr bought for any car ive ever built or owned.

Ive set cam gears to make gains throughout entire rev range...some parts very small gains but yes gains everywhere. None of this "rob peter to pay paul" (pardon the pun) stuff your on about.

your right about the cams though...stockers dialed in right with small low-mounts do the trick. No cams but id fit gears to them.

my 2 cents :laugh:

can i ask what single plate clutch u had? dont tell me its a Jim Berry? :) that name comes up everywhere- sorry for being off topic

can i ask what single plate clutch u had? dont tell me its a Jim Berry? :laugh: that name comes up everywhere- sorry for being off topic

ok if i cant tell you it was a Jim Berry "full monty" then i cant tell you what clutch it was... :)

lol @ full monty.. the highest rated single plate ive ever seen was a 500hp unit...

from exedy.. hks one is rated lower and so is almost everyone elses..

give us details of this clutch champ.. otherwise.. ur talkin shit :laugh:

Very interesting clutch.. although a few ppl have destroyed the clutch while rev dumpin??

still thou, sounds like an awesome clutch.. i did say most singles

theres bound to be some insane singles out there.. but i didnt think so cheap :laugh:

Im confused whats the name of this Single Plated Clutch which is capable of holding 500hp?

I will do a search in the drivetrain section, just need to name and model number.. cheers.

If its cheap and can hold that kind over power then i will look into grabbing one myself.. Cheers Guys.

Just do a search for Jim Berry, he makes awesome clutches. I used 1 for about 8mths before my flywheel smashed but it was the best clutch ive ever used in my life. Not a hint of slip, not too heavy and can be daily driven without driving around looking like a kangaroo.

My next clutch however will be a twin plate (probably a Nismo super coppermix).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...