Jump to content
SAU Community

Recommended Posts

if im getting the ECU tuned can i run bigger injectors then?

say maybe some GTR injectors or something? whats the easiest and cheapest option when it comes to injector upgrade with tuned ECU? I mean its a not a huge turbo so i wouldnt be expecting more than 320rwhp out of it... so what would enable me to safely run 300rwhp (220rwkw)? or will my stockies be able to SAFELY handle such power?

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

The tuned ECU will only handle the same impedance injectors, which can limit your choice. I believe there are resistor packs you can buy to modify the impedance to work with the stock ECU.

Injectors are expensive, a fuel reg isn't:D

yeah well like i said the reg has already been ordered so i will be running it, i figured if it was easy to upgrade injectors when getting the ECU tuned i could grab some 2nd hand GTR injectors as ive seen them advertised on this forum pretty cheap.

Ill see what i can get out of the pump with regulator first then maybe tune the ECU.

Problem is ive already gone over budget and dont want to spend anymore!!! NOOOOOO but hey its addictive!

bbenny, that turbo is an awesome combo on the rb20, injectors can stretch to 230rwks no probs with a decent fuel pump and pressure reg. Several guys have been running that sort of power out of them for years with no probs.

It may be worth getting a metal afm to turbo pipe, as I have seen them start to choke at about 200rwkw.

Paul, once its fitted, the cost will be forgotten:D (or at least excused:p )

steve: 230rwkw is awesome! are these guys running std computer? i hope i can acheive that sort of power!

Nissky: Procar is in Cromer (northen beaches) the guys there are really nice too, i had never been there until recently on a dyno day. then booked it in last week and was suprised how cheap they were! so i dont mind making changes and getting it back on there.

But they dont burn chips for ECU's so i need to find a good place that does.

Thats what i like to hear :)

ill be very happy if i get anything over 200rwkw but 230 is just awesome! well i pick up my new pump and reg tomorrow so hopefully ill fit it all after work and see what i get on the dyno.

Your doing better than me Benny.

I got my car tuned at Procar and hit 251rwhp at 0.8bar on my rb25t. My AFM is the problem at the moment so the other day I went down to Envy Imports and bought a Z32AFM + plug for $260. Hopefully now I can get it tuned at 1.1bar or so (aiming at 300rwhp).

Out of interest, who put it on the dyno? Paul or Jake?

Mark

Neither paul or jake actually, i cant remember his name, a young guy Gorban or something (it was an unusual name) nice guy and knew what he was on about.

the guys at envy are always really helpful, thats who ive ordered my pump and reg from. are you running std computer?

What about SAS? Silverwater Automotive Services.

Unit 1 Silverwater Road Silverwater NSW 2128

PH: (02) 9748 1300 FAX: (02) 96472805

Contact:Aaron Franklin and David Alexander

Email: [email protected]

Local chiptorque agents!

They are Chiptorque agents so should be able to help.

SAS did a friends car, with good results. They also help out with a lot of the Horsepower heros cars at the Summernats, so obviuosly know their way aroud tuning modded cars.

However knowing what they charged for friends car, and what they quoted me for a re-written RB20 chip they are expensive. I suppose you get what you pay for.:)

bbenny i was eyeing off Chris' 2530 as well, dont be too happy with it, youll make me jealous:D

Guest R33GTS25T

GT2530 Turbo Is Good For 220rwkw to 250rwkw got one myself on a 96 gtst.

Having problem though seems to give off a popping sound in between gear changes the sound is comming from the rear (Travelling Down The Exhaust). Sounds like a misfire but is very faint sometimes it is louder but no where near a bang. Doesnt happen if i change fast and get back onto the throttle before the revs drop.

Also doesnt happen when the foots down or when above 4000rpm roughly

Need Help PLz

Yeah the 2530 doesnt usually make over 250rwkw, but remember it has a pretty fat mid range - so its a wicked setup for the street. extremely quick!

Im picking up the bosch pump and sard reg tonight so hopefully ill stick it in tomorrow and throw it back on the dyno to see what happens.

then get the ECU tunned.

Roy: yeah ive heard pretty much what you are telling me about SAS - they know their stuff but charge twice as much as most. I was quoted around $1300 from them a while ago and decided against that and to buy a new turbo instead to make the power.

But looks like i have no choice now

anyone know reasonable tuning shops in sydney? someone that knows skylines maybe...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is anyone running these axles? R32, R33, R34 GTR front Axles. shafts itself rated 950hp. Suit all RB26 engines Croydon, Melbourne, Victoria Would be nice to pay half the cost of Driveshaft Shop Axles. I'm building an AWD S13 Coupe that is very low ride height (high cv angle) compared to stock R32. Has an RB30 with appx 600whp. Just looking for feedback. Thanks, Josh- https://www.instagram.com/feng_shui_garage/
    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
×
×
  • Create New...