Jump to content
SAU Community

100k Service For R33 Gts-t

4doors13secs

By 4doors13secs,
in Queensland

 Share

Recommended Posts

4doors13secs Contributor

4doors13secs

Posted
Posted

hey peoples... my car(R33 gts-t 4door) is coming up to 95k's so im starting to get abit of information about the 100k service as this is my first car that has needed this, it's only got a exhaust and pod if that helps...was just wondering if anyone has any good comments or recommendations for a workshop in brisbane(southside would be best but any welcome)..rough ballpark prices would be appreciated..thanks :P

Link to comment
https://www.sau.com.au/forums/topic/227568-100k-service-for-r33-gts-t/
Share on other sites
black_gtst Proficient

black_gtst

Posted
Posted

if you want to do it properly, ring round some workshops and get a quote to do; timing belt, tensioner bearing, idler bearing, bottom air con pulley bearing, water pump and cam seals! then normal stuff like belts etc. Worth fitting an adjustable cam gear while its all apart if you have future plans for the car too. hope this helps

Amec Experienced

Amec

Posted
Posted
AMEC - Can you give a breif listing of what is included in your 100k services for $953

sure :laugh:

our R33 GTST 100K service includes:

Idler & Tension Bearing

Tensioner Spring

Cam Seals & Front Main Seal

Genuine Nissan Timing Belt

Genuine Nissan Water Pump

Labour and Fluids

Triptych Proficient

Triptych

Posted
Posted

Kudos Motorsports offer a few 100 000km service packages (3 I believe) for the R33. So if you wanna purchase parts and find somebody to install here are the links to all 3 packages by Kudos.

Kudos Basic Kit

Kudos HD Kit

Kudos HD+ Kit

Cheers.

RusH_ Veteran

RusH_

Posted
Posted (edited)

hey Amec, just outta curiosity, i have a 34 gtt and im comin up to my 100k service too, would the cost be the same for my car since it too is an RB25DET? also, is it possible for you to guess how much extra it would cost to get a rocker cover gasket fixed at the same time? hoping to save on a bit of labour doing it then.

Ill also make sure i shoot a call ur way too ECC

Edited by RusH_
Amec Experienced

Amec

Posted
Posted
hey Amec, just outta curiosity, i have a 34 gtt and im comin up to my 100k service too, would the cost be the same for my car since it too is an RB25DET? also, is it possible for you to guess how much extra it would cost to get a rocker cover gasket fixed at the same time? hoping to save on a bit of labour doing it then.

Ill also make sure i shoot a call ur way too ECC

yep 100K service will be the same price $953 including parts and labour :blink:

will do the rocker cover gasket for $85 + cost of the gasket.

exnizmech Apprentice

exnizmech

Posted
Posted
rush - same price champ

wont get in price wars on forums or anything as it is not very professional or ethical , so give me a call if you want labour quote on the r/c gasket :P

Good call, this forum eats up and spits out workshops that try to get work off of here.

Do some searchs on workshops that have tried to help members in the past, most of them have moved on from here never to return.

You will be the flavour of the month while you are giving them forum member discounts, then another shop will undercut you to get the work and BOOM you were a rip-off and you will get bagged and dumped.

Not all members of this forum are users and abusers, but a few bad apples as they.

Amec Experienced

Amec

Posted
Posted

With AMEC, not only will you get good service and value, but we also have the unique claim where the mananger regularly competes in circuit racing and has won the Queesnland Raceway sprint series in a race car built by our workshop. All on the same VG30DETT motor we built back in Feb 2006 and she is still going strong @ 24 psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...