Jump to content
SAU Community

Recommended Posts

BOV = pop off valve. Blocking off the BOV (or pop off valve whatever you wish to call it) has the potential to sound sweet (to some people) but it is there that the benefits end. i tried it on my 33 gtst and it ran sh1t, stalling and bogging down when gear shifting. on top of that the airbox/afm/etc muffled the dose so i could hardly hear it.

if you want to dose... get a VL. don't butcher your skyline like that. btw this advice is coming to you from a (former) die-hard dose fan, should give you an idea of how badly youll soon dislike it.

Cheers

Ric

Link to comment
https://www.sau.com.au/forums/topic/227610-r33-dose/#findComment-4007713
Share on other sites

"dose"

First time i heard a name like that. Still don't really know what it means. Does it mean remove the stock BOV completely and sealing the intake pipe shut?

yes that's what it means. gives the unique zzzzutututu 'pigeon in your air intake' sort of sound. admittedly i like the noise and the subculture, but at the end of the day it makes the car run poorly (see my post above) and who knows what sort of internal damage it's doing.

Link to comment
https://www.sau.com.au/forums/topic/227610-r33-dose/#findComment-4008340
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...