Jump to content
SAU Community

Recommended Posts

to change gear oil:

get it up in the air,

whip out the two plugs that a half inch fits into,

let oil drain out,

replace bottom plug,

fill with oil until it starts coming out of top plug hole

replace plug

easy!

Edited by cuppas

it will only shift into 5th after car(or maybe gearbox) warm up,like start the car warm up2-3 mins,diver to a freeway,i can clearly see,the rev stay under 3000rpm@100km/h. but after travel 10km stationary speed,can feel it sfit 5th,and rev drop back to 2600@rpm@100km/h . is that still normal?

  • 3 weeks later...
I'm not 100% sure but that doesn't sound right. I thought it was 4-speed autos only for the R33.

dont konw it is 4sp or 5sp,but i definitely can feel that final shift,or can see from the rpm instrument(4th 2800@100km/h 5th 2600@100km/h <or called factory extra>).

i think the way to find out how many speed of the gearbox is count the how many times it shift.which is means 4 shifts u got 5 gears or what ever the factory extra,am i right?

Well yes and no.

I'm pretty sure it's only a 4 speed auto box in the R33. It may possibly have some sort of overdrive or something, in which case that could be mistaken for some sort of 5th gear.

Searched the net, it always comes up with: "The RB25 turbo comes with either a 4-speed auto or a 5-speed manual".

So if it is some sort of overdrive, then I'd expect to only come on at high speeds (~100km/h) and only once the car was warmed. I wouldn't think any more of it, either way you don't have a 5th gear so there is nothing wrong with your gearbox. Plus, anything under ~3000rpm at ~100km/h is fine. My manual R33 sits at ~2700rpm in 5th on the freeway.

Well yes and no.

I'm pretty sure it's only a 4 speed auto box in the R33. It may possibly have some sort of overdrive or something, in which case that could be mistaken for some sort of 5th gear.

Searched the net, it always comes up with: "The RB25 turbo comes with either a 4-speed auto or a 5-speed manual".

So if it is some sort of overdrive, then I'd expect to only come on at high speeds (~100km/h) and only once the car was warmed. I wouldn't think any more of it, either way you don't have a 5th gear so there is nothing wrong with your gearbox. Plus, anything under ~3000rpm at ~100km/h is fine. My manual R33 sits at ~2700rpm in 5th on the freeway.

but it will come up when car warm at low speed,1600rpm@60km/h,if not it will reach low2000rpm@60km/h

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
    • This is how I last did this when I had a master cylinder fail and introduce air. Bleed before first stage, go oh shit through first stage, bleed at end of first stage, go oh shit through second stage, bleed at end of second stage, go oh shit through third stage, bleed at end of third stage, go oh shit through fourth stage, bleed at lunch, go oh shit through fifth stage, bleed at end of fifth stage, go oh shit through sixth stage....you get the idea. It did come good in the end. My Topdon scan tool can bleed the HY51 and V37, but it doesn't have a consult connector and I don't have an R34 to check that on. I think finding a tool in an Australian workshop other than Nissan that can bleed an R34 will be like rocking horse poo. No way will a generic ODB tool do it.
    • Hmm. Perhaps not the same engineers. The OE Nissan engineers did not forsee a future with spacers pushing the tie rod force application further away from the steering arm and creating that torque. The failures are happening since the advent of those things, and some 30 years after they designed the uprights. So latent casting deficiencies, 30+ yrs of wear and tear, + unexpected usage could quite easily = unforeseen failure. Meanwhile, the engineers who are designing the billet CNC or fabricated uprights are also designing, for the same parts makers, the correction tie rod ends. And they are designing and building these with motorsport (or, at the very least, the meth addled antics of drifters) in mind. So I would hope (in fact, I would expect) that their design work included the offset of that steering force. Doesn't mean that it is not totally valid to ask the question of them, before committing $$.
    • The downside of this is when you try to track the car, as soon as you hit ABS you get introduced to a unbled system. I want to avoid this. I do not want to bleed/flush/jack up the car twice just to bleed the f**kin car.
×
×
  • Create New...