Jump to content
SAU Community

Recommended Posts

here are the rough numbers from FAST...

ECR33 - 001000 1993 August (First R33 Built)

ECR33 - 063435 1995 December (S1.5 around here somewhere - ballpark near ECR33 mid 055000)

- model change-

ECR33 - 102000 1996 January

ECR33 - 135381 1998 April (Last R33 built)

so from this we can see ballpark there are around 65,000 Series 1's and approx 35,000 series 2's

SO I HAVE A SERIES 1.5???

whats the big issue?

i swear a few people have said yes its a series 1.5 - its a series 1.5

to be a legit series 2 i would expect

- series 2 interior

- series 2 dash cluster (bevelled warning lights, s1 has flat dash lights)

- series 2 dash (bubbled and textured, s1 has flat matt black)

- series 2 wing

- series 2 engine and front bar, lights, bonnett

- 1996 VIN or build date, anything pre 1996 is almost always 1.5 or 1

- series 2 boot SKYLINE panel is same colour as car (s1 has clear panel)

to be a legit series 2 i would expect

- series 2 interior

- series 2 dash cluster (bevelled warning lights, s1 has flat dash lights)

- series 2 dash (bubbled and textured, s1 has flat matt black)

- series 2 wing

- series 2 engine and front bar, lights, bonnett

- 1996 VIN or build date, anything pre 1996 is almost always 1.5 or 1

- series 2 boot SKYLINE panel is same colour as car (s1 has clear panel)

- a silver rear trunk lock badge

- dual airbags

- no coin holder near the mirror controls

Added 3 more changes to paulr33's list.

The most obvious change is that series 2 has dual airbags. Series 1.5 only driver side airbag and series 1 no airbag whatsoever. No matter how you see it, the airbag is the one thing no one can change hence it you only have what you have then you know what series skyline you have.

You can have a series 1 with series 2 bumper, fog lights, engine and whatever, if you ain't got dual airbags then you ain't got a series 2. Same goes for the other two series. Basically i like the series 1.5 cause it doesn't have the damn heavy passenger airbag and the external ABS module at the center console. Damn module makes the pocket smaller.

I have a series 2 skyline and i changed the boot skyline to a clear one and my trunk lock is not the series 2 one as well so i have a series 2 front end and a series 1 rear end. Even the agent here says why the f**k do i have such a weird skyline. lol

Edited by teng

dont know - we could guesstimate at best guess

the only rare r33 models i can think of are

- series 2 & 4 doors

- series 2 with active lsd

- series 2 with 40th anniversary

- series 1 & 2 GTS4

Yes, tons and tons and tons of right handed R33's Patty.

Lol, I think you are talking about the R33 Left Hand drives... and no, they were not made for the USA, they were put in the left hand drive cities in some other parts of the world. They never have released and never will release a "Skyline" in the USA. The closest we get is the G35, the V35 in Skyline Countries, the G37, the V35 370GT in other countries, and the new "GTR" which is technically a Skyline BUT no "Skyline" badges.

So no, the USA never got any and seemingly never will get any. But I have one in the USA so all is well.

It is a late series 1 and someone's fitted a series 2 bumper for what ever reason, crash, aesthetics etc.

Both series 1 & 2 have a coil pack for each spark plug, it's just that the early series 1 have an external igniter, where as late S1&2 have the igniter built into the ecu.

the igniter is actually built into the coil pack not the ecu.

A series 1 or even a remapped RB20 ecu will run a Series 2 motor no worries.

Off Topic but can someone put this in to nissan fast and show me the info.

VIN: ECR32 - 011618 M06126

Im looking at you Pual :(

Cheers

if you read the thread i posted a link to the fast thread a bit earlier.

Edited by W0rp3D
the igniter is actually built into the coil pack not the ecu.

A series 1 or even a remapped RB20 ecu will run a Series 2 motor no worries.

Right, and I have already pretty much rounded the car down to BEING a 1.5 as well has everyone else. It is series 1.5 which is grand! The coil pack has igniters, no external amplifier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...