Jump to content
SAU Community

Recommended Posts

ok so it was noticable tonight to post up on here, at around 4000rpm its almost like the car takes the accelerator off, cause i get a drop in revs and a back fire noise.

it only does it every now and then, but it shouldnt be doing it......

the car is stock, apart from 4inch hks dragger cat back exhaust, pod filter, super spark coil pack, nismo S-tune sparkplugs and supposedly a bigger fuel pump?

is it just a case of maybe running too rich? overflowing the car with fuel and choking it??? injectors? spark plugs? im new to the whole skyling thing so any advice much appreciated

if youy need any more info please let me know

cheers

rhys

i heard it tonite when you took off,did it in first but not in seccond??id just start with the basics like plugs first.have you checked the condition of them since you bought it?do you know what there gapped to?get a hold of some NGK copper plugs to chuck in here to see if that fixes the prob,there cheap and available from just about any where.

oh and it sure as hell didnt sound like traction control cutting in lol.sounded like you had a Bee R installed :laugh:

I'ts not knocking is it? Don't have an orange light flashing when you put the boot into it?

Otherwise its either air of fuel. I'd get your fuel flow and pressure tested, 10 minutes and say $50 at any reputable garage. At least that would eliminate fuel up to [but not including] the injectors.

no flashing lights, and no knocking i can hear from the drivers seat. im gonna drop into my mechanic tomorrow night and ask him a few questions, it does feel like a fuel issue....

jack, whats a bee R? yeh it did do it in first then i short shifted to 2nd and it was fine :s

Im guessing AFM, do a diagnostic search on the ecu and see if there are any trouble codes

thanks for the reply but im relatively new to the skyline thing, so if you could describe how i could do that? or is it left for someone with a dyno?

cheers

rhys

yep, I would look at failing fuel pump. or even fuel pump loose in tank. it's quite often very pronounced in 1st gear as you get rapid change in fuel requirement as it ramps onto boost, and the acceleration g's push all the fuel to the back of the tank too.

yep, I would look at failing fuel pump. or even fuel pump loose in tank. it's quite often very pronounced in 1st gear as you get rapid change in fuel requirement as it ramps onto boost, and the acceleration g's push all the fuel to the back of the tank too.

i think you may be right, i just taped up every coil to try that method, it has worked somewhat but now i am only getting it in 1st gear after 4000rpm when i seem to be turning??? it barely does it when going in a straight line in first....

so im leaning more towards a pump loose in the tank?? sound about right? whats my next step from here then?

cheers

rhys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...