Jump to content
SAU Community

Recommended Posts

OK I want the part, have the cash, but I'm not spending money on an item that won't fit correctly. I need confirmation that this will fit a GTR before I purchase.

Please PM johnbarry88 as he has the sample.

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Please PM johnbarry88 as he has the sample.

Hi PSI,

John may be doing a great job designing the part, but I'm buying it from you and expect to be able to return it, if it doesn't fit. Not that I want to return it in the first place as it costs me time and money to do so.

John may be doing a great job designing the part, but I'm buying it from you and expect to be able to return it, if it doesn't fit. Not that I want to return it in the first place as it costs me time and money to do so.

I only asked you to PM him as he was going to conduct testing on different series and possibly even a GTR so he might already have the answer you are looking for. Without having the part myself (there is only one sample at this stage) I can't guarantee it will fit. If you want to order anyway you are welcome, and by all means return the part if it doesn't fit, as per our terms and conditions (PM me if you are unsure) and we will refund you.

  • 2 weeks later...
Hi mate i would like to order one for my R33 4-door...

If i can still order one then could you send me the details and i will order ASAP.

Cheers

Adam

Here is a link to the item:

http://www.psiparts.com.au/front.asp?pid=8...ID=R33S-EXHS-CF

Shane

Hi Guys,

The shrouds arrived and were all shipped today (Thursday) via Express Post so you should have them for the weekend!! :P

Cheers,

PSI Parts

i like the finish on mine however doesnt fit as well as i thought it might of the top of mine is warped for lack of a better discription. hopefully once riveted on it will fit nice and snug to the bumper.

Yeah ditto... Mine doesnt quite fit the curved contour of the bar properly. Havent fitted it, but I dont think it's going to make much difference as carbon isnt the easiest stuff to bend!

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...