Jump to content
SAU Community

Recommended Posts

Hi all,

Like many others I had an ABS unit that was leaking and did not want to put another 15+ year old unit on that wasn't leaking yet but was going to, probably 2 minuts after I had paid $400 for it.

Having looked around here on the forums it seemed no one had ever tried to repair one. Since I have a background in brake cylinder resleeving, I had been given many odd things to rebuild and repair because they were either too old or expensive to buy new.

I decided to try to repair mine. What was I going to lose? - I already needed a new one !!!

Anyway, I pulled the thing apart right down to nothing to find the internals all in good condition mainly because they are all made from aluminum and therefore doesn't rust or pit easily. Just the seals had gone hard.

So I tracked down a company that sells EPDM seals (the only material that holds up to brake fluid) and we went about matching them all up (about 36 of them). We found all except one and I started the reassembly.

All went well. Four hours went past and I was refitting the unit to my car, bled the system through and hey presto - Job's a goodin.

The unit has now been back on the car for a few days and all seems to good. Brakes work as new and abs funtion is perfect with no leaks .

Any-one that has some mechanical knowledge and the right tools should be able to do this without too much hassle.

I will keep this updated if any problems arise or if any one wants some help doing there own.

GIVE IT A GO! WHAT DO YOU HAVE TO LOSE? MY UNIT IS NOW AS NEW, NOT SECOND HAND.

Link to comment
https://www.sau.com.au/forums/topic/228596-abs-unit-i-rebuilt-it/
Share on other sites

Basic tools ie spanners allen keys etc all the normal stuff if you play with cars , nothing exotic

Seals cost me about $75.00 plus some brake fliud got them from a company called Trans seals

If you pull one side of it apart at a time you will always have a referance to look at if you get confused, just take your time and keep things clean .

Ok for those that want to give it ago the company i got the seals from

Trans seals Pty Ltd www.transeals.com.au

1 Atlas court Welshpool WA 6986

08 9458 5766

You will need

number required

2 O-Ring 1.864 x0.070" EPDM-70

2 O-Ring 0.364 x 0.070" EPDM-70

2 O-Ring 0.489 x 0.070" EPDM-70

2 O-Ring 0.612 x 0.103" EPDM-70

2 O-Ring 0.424 x 0.103" EPDM-70

2 O-Ring 0.426 x 0.070" EPDM-70

3 O-Ring 0.609 x 0.103" EPDM-70

3 O-Ring 0.864 x 0.070" EPDM-70

3 O-Ring 0.143 x 0.103" EPDM-70

15 O-Ring 0.176 x 0.070" EPDM-70

2 O-Ring 0.676 x 0.070" EPDM -70

2 O-Ring 0.987 x 0103" EPDM-70

Some PBR rubber grease Available from Repco or the like

Next time i do one i will take photos and do a how to page , until then I'am happy to answer questions .

  • 1 month later...
  • 5 months later...

Nice work!!

Mines always had a very minor leak & didnt want the risk of a 2nd hand unit.

Did you bleed the entire system again once changed or just the nipples on hte ABS unit?

Glad the seals r in Perth, was expecting them to be over east :D have printed out your list. thanks

Mike

2 O-Ring 1.864 x0.070" EPDM-70

2 O-Ring 0.364 x 0.070" EPDM-70

2 O-Ring 0.489 x 0.070" EPDM-70

2 O-Ring 0.612 x 0.103" EPDM-70

2 O-Ring 0.424 x 0.103" EPDM-70

2 O-Ring 0.426 x 0.070" EPDM-70

3 O-Ring 0.609 x 0.103" EPDM-70

3 O-Ring 0.864 x 0.070" EPDM-70

3 O-Ring 0.143 x 0.103" EPDM-70

15 O-Ring 0.176 x 0.070" EPDM-70

2 O-Ring 0.676 x 0.070" EPDM -70

2 O-Ring 0.987 x 0103" EPDM-70

Good work. With one exception, I can give the direct reference number, which is much easier for suppliers to work with.

You mention in the first post that one o-ring could not be found. Do you have the dimensions as there might be something available that will be close enough to do the job ??.

  • 7 months later...
Good work. With one exception, I can give the direct reference number, which is much easier for suppliers to work with.

You mention in the first post that one o-ring could not be found. Do you have the dimensions as there might be something available that will be close enough to do the job ??.

Will be doing this in the near future,just ordered the o-rings,will post pics when done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...