Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Omg! now a million dollar question which I forgot to ask.....is it the same asd the R32 GTR one..if it I will take it..

From all the pics i have seen it is. The reservoir is different but the lid looks to be common between the 2

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Hi mate,

I have a panel glued to the back of the surround with gauges mounted and will have to see if i can remove it without damage.

Oil cooler sold

GTSt indicators sold

I am removing the engine tomorrow, i started and videoed the engine today prior to removal so if anyone is interested in the engine i can get a copy of the vid over. The car ran for about a minute before being shut off and idled surprisingly well considering the hole in the intercooler end tank which we found later.

I also carried out a compression test about 5 minutes after taking the video

1) 150psi

2) 152psi

3) 151psi

4) 150psi

5) 150psi

6) 150psi

I was pretty surprised by the results as i have never tested an engine with such consistent compression.

So splitfires and injectors are now available

engine and box are now out of the car.

Passenger side caster rod was found to have a slight bend as seen in the attached photo so price is reduced to $75. It's probably still usable, the threads are fine, ball joints fine so if anyone wants to have a punt, $75 firm or i keep em for bits.

post-2863-1217150516_thumb.jpg

Also pics of some of the other bits i am getting questions about.

post-2863-1217150798_thumb.jpgpost-2863-1217150821_thumb.jpg

post-2863-1217150854_thumb.jpgpost-2863-1217150878_thumb.jpg

post-2863-1217150919_thumb.jpgpost-2863-1217151121_thumb.jpg

post-2863-1217151220_thumb.jpg

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

Hey mate,

Speedo drive SOLD

Check your PM

Cheers.

i have a stock one but it is far from good. I'm keeping my aftermarket one on the off chance i buy a new car that it suits.

If you need it anyway send me a pm and we can talk price.

now separating the cams, cam gear and engine. I'll remove them from the engine this weekend and reinstall stock cams and cam gear

so early hks rb25det cams 256 8.8/264 9.0 $650. If i find i have a spare stock exhaust wheel i'll chuck in the adjustable one at that price

s1 rb25, no coils, no turbo and a set of stock injectors and a rail. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

Edited by BHDave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...