Jump to content
SAU Community

Recommended Posts

Hey Guys, recently my battery died because i left my lights on so i had to jump start it, so after ive jump started the battery ever since then ive had this problem with my power steering.

now i dont know if its got to do with the jump start or if it was just a coincidence, but my power steering is now screwed, it gets really hard at times to turn a corner.

When i turn a roundabout for example itll seize up and release, its mixed. So its not like its hard the whole way round, just split moments if im making sense. Now ive checked my reservoir and its full and doesnt seem to be leaking, and my p/s fuse seems to be fine, so any information you guys can give me would be much appreciated. :blush:

Cheers,

Steve.

Link to comment
https://www.sau.com.au/forums/topic/229184-power-steering-problem-r32/
Share on other sites

the main reason for heavy steering is a leak somewhere. and considering the numerous little pieces of presumably old rubber between the diferent hard line sections scattered all over the car, including the ones back to the hicas..... ya probably leaking somwhere.

replacing old power steering lines has become a hobby of mine with my 32.... just about got them all.

probably a fault with the vehical speed sensor, maybe fried it when you jump started. as i understand it, when your at idle and not going anywhere a solinoid switches the powersteering pump into a low pump mode so it doesn't bog the engine down, once you start moving it swiches the pump to full. if you speed sensor if playing up the pump wont be switching into full mode hense the heavy stearing.

try doing a ecu diagnostic and HICAS diagnostic and see if you get an error code. there is info on this in the tutorial section. or if you know someone with a consult cable get them to check for you.

It's a voltage problem. You may well have to replace the battery.

Same thing happened to me a few weeks ago, its definitely voltage, mine turned out to be the alternator had packed it in. The HICAS solenoid was opening and closing with a lack of voltage at idle whilst driving at night with headlights and accessories on. Sounded like there was something caught around my drive shaft and slapping against the foot well but really it was the pressure building up in the lines by the pump and then and getting released sending a shock wave through the lines, it was only audible at a standstill at low revs, when i was moving it just turned into heavy-light-heavy steering as i was turning a corner. My alternator seemed to work on start-up when it was cold (14.5V i think) then stopped working after a few minutes causing rough idle, whine through the stereo and dim headlights. I ended up killing a battery a new battery in the process by dropping it below 8V for too long and it never came back even after i changed the alternator. In the process of getting a battery zapper to see if i can bring it back to life, cold winter mornings are asking alot more from the battery than usual. Its been 2 weeks with a new alternator and haven't had any steering problems which used to happen everyday.

it wasnt the battery or the alt. I went past oh performance and they seem to believe it may be the power steering pressure sensor, so im looking at changing that to see what happens, but i cant seem to find 1. Anyone know where i can find 1?

hey mate. if your alternator is overcharging for example 15volts and over it could be spiking the computer and the system is shutting down because of it saving the components in your power steering. charge rate for all vehicles should be no lower then 13.5v and 14.8v. some of these problems i've seem through my workshop are caused from an intermitted charging fault. the battery wont cause the problem as it is only a storage device, once the vehicle is running the alt runs the vehicle, not the battery. hope the helps.

yea thanks mate, it is overcharging, because what ive realized is when i start the car the voltage sits at around 12v and the steering is perfect, as soon as i give it a rev past 3,000rpm the volts rise to about 14.5-15.0v and the steering is rough.

But another thing that happened that i found really weired is i changed my fuel pump the other day and ever since then, night time driving is great, voltage sits from 13.9-14.3 and steering is perfect but day-time driving sits at 14.5-15.0 again. Thats trippy shit.

So anyway, we've come to the conclusion that the alt needs to be changed.

Thanks for all the feedback guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...