Jump to content
SAU Community

Clutch / Gearbox Problems - Please Help Me

Kdawgboostin33
 Share

Recommended Posts

Kdawgboostin33 Collaborator

Kdawgboostin33

Posted
Posted

Hey Guys,

Gotta problem. Car started makin this funny noise last nite, (Sorta like a cricket) Coming from under the Fuel Rail. It had me a little puzzled:uh-huh: But when I pushed the clutch in the sound kinda went away...... But after drivin it today it feels crappy to drive. Basically it feels like it is resonating a lot more through the drivetrain - and when I go to stop at the lights it shudders just b4 I come to a complete stop! Does anyone know what this could be?????

Link to comment
Share on other sites
gtrhybrid Contributor

gtrhybrid

Posted
Posted

Its a rare thing and costs having a tranny shop pulling the bad one and pressing the new one in. You say the noise goes away when you put the clutch to the floor and that would mean the shaft is no longer spinning. Makes sense to me and my x girlfriend just had hers replaces and it had the same symptoms. Go to the tranny shop and just ask him to listen to the noise and see what he says.

Link to comment
Share on other sites
gtrhybrid Contributor

gtrhybrid

Posted
Posted

they have talked about it but no action yet. I think its mostly from inflation over here and they would coast as much as porche which means only the rich f***s would have them. That would just piss me off cuz they can afford them but they can't drive them for s**t.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 non hicas power steering solenoid issues!

      By GTSBoy · Posted

      I have no idea what the power steering control module is on a non-HICAS car because I've never seen one. But it is a fair bet that is essentially the same thing as on any other Nissan of the period with variable PS. So, Maximas, that sort of thing. It will pick up the ECU's speed signal off the "bus" (there's not really a bus - any consumers of the VSS are all just connected to that output on the ECU). The output should (most likely) be a PWM signal to give you an effective average voltage between the minimum and maximum values. You could possibly look at the HICAS part of the R32 manual to see what that range is likely to be (for non-HICAS, as it should be about the same).
    • Heyyob22
      Parts required for 4:11 diff gears in an R34 GTR Vspec (A-LSD)

      By Heyyob22 · Posted

      Thank you for the info!    Did you get a 33 gearbox speed sensor to have your speedometer to work? Does the Speedo work but not accurate? 
    • Duncan
      Duncan's Race Car - The Most Overdue Build Thread On Sau

      By Duncan · Posted

      Took me a while to answer that.... Funny thing is, the across the river neighbour did put in an airstrip, built a hanger, and buy a cessna, because strangely they aren't allowed to build a house on the property but there is no problem building an airport terminal They've used in 3 times, once for an attempted landing where they misjudged a little, aborted and missed the trees by so little that new underwear was required. Second time the landing stuck, then a few weeks later the plane left and never returned, so I don't think aircraft noise is going to be an issue. Funny looking back through the last few posts too, I've spent a heap of time lately redoing the roads  and drains so I guess it is a 2 yearly thing to add to the calendar. Those big drains did overflow in the rain about a month ago so that is pretty disheartening....just a reminder that you can't stop nature I guess.
    • D.phantom
      R32 non hicas power steering solenoid issues!

      By D.phantom · Posted

      So I’m having issues with my power steering. the obvious heavy and light and comes on and off randomly now it’s constantly heavy. I’ve read through forums regarding this issue and what I’ve gather is that it’s referring to hicas deletion. That’s the problem mine didn’t come with hicas.    I’ve rebuilt the steering rack, pump, changed the bent hardline on the rack and taken out the solenoid to clean and loosen up the actuator, applied 12v to get it moving. Roughly checked the loom to see if there’s any damage to the loom and nothing. Now I’m checking the wiring. I’ve tested the wiring to the solenoid and it’s fluctuating between 0.07v to 0.03v. Does anyone know what it’s supposed to be reading? 5v? Anyone one know how this all works? Is there a fuse in between? What else is it connected to? How does it connect to the speed sensor? A resistor fried in the ecu? Please help. It’s been years Thanks in advance 
    • niZmO_Man
      Chips/Dents in wheels

      By niZmO_Man · Posted

      that's pretty good condition, those chips are nothing. Get a mobile repairer to sort it out. Nice wheels, I had white 17's on my GT-R once, looked nice.
×
×
  • Create New...