Jump to content
SAU Community

What Are Some Signs Of A Worn Clutch?

AlexR34

By AlexR34,
in Queensland

 Share

Recommended Posts

AlexR34 Proficient

AlexR34

Posted
Posted

Hey Guys,

A little about me, as you can see on the left ive been a member for a while now, but ive sold my skyline about 6 months ago :sick::rant::):( :( :(, but i always feel like i will be back in a skyline i dont know why lol. I still stick around and read the qld section and help people out or comment on stupid crap ahahahha.

Anyways i bought and alfa romeo and im not sure how the car is spose to feel but the first gear seems a bit week lol. Anyways, what are the things to look for in a worn clutch like what are the obvious signs.

Thanks All.

blitza Collaborator

blitza

Posted
Posted

there are two obvious signs I have come accross on various cars over my years:

one would be shudder, i.e. if you are taking off from a standing start, with a small amount of revs (1-2K) the car gives a shuddering feeling

another other would be when the clutch disengages when you are giving the car a kick in the guts, and the revs climb quickly like you are burning out but no power gets put to the ground.

Hope that helps

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted (edited)
there are two obvious signs I have come accross on various cars over my years:

one would be shudder, i.e. if you are taking off from a standing start, with a small amount of revs (1-2K) the car gives a shuddering feeling

another other would be when the clutch disengages when you are giving the car a kick in the guts, and the revs climb quickly like you are burning out but no power gets put to the ground.

Hope that helps

Ok im pretty sure the clutch is gone then lol. One that car shudders when i slow down to about 10 km's per hour and when i touch the gas instead of accelerating slowly it sort cuts in and out lol. But the worst part is when im slowing down and say i put it in second gear and am at about 20 k's per hour and take my foot of the clutch the car shudders. The second one is the car is spose to be pretty quickish, like a golf gti but first geer keeps letting me down.

SO will inquire for a new clutch.

Anyone have any recommendations for places that do half decent clutches for Alfas ahahhahaha.

Its not too bad currently my main annoyence is when i slow down to about 10 or so k's it starts shuddering and needs a bit of revs to get going.

Edited by AlexR34
AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
Yep Ya Right Blitza. Put in fourth & chomp on it if it starts to rev without going anywhere gooooooooooooooone.

Ahh thats a good test. I have put it in forth before and slammed it no problems, I guess its just a gay car and has a crappy first gear. I was just use to my auto na 34. say watever you want but that thing was a rocket in first gear in tiptronic.

R334door Experienced

R334door

Posted
Posted
there are two obvious signs I have come accross on various cars over my years:

one would be shudder, i.e. if you are taking off from a standing start, with a small amount of revs (1-2K) the car gives a shuddering feeling

another other would be when the clutch disengages when you are giving the car a kick in the guts, and the revs climb quickly like you are burning out but no power gets put to the ground.

Hope that helps

The shuddering can be two things, one what you said and two hotspots on the flywheel cause by bad clutch use..

another sign if your clutch is gone or going is pedal may feel soft and spongy on pressing to the floor and as what another member said revs go up but go know where.Best to get a mechanic or a member to have a look for you if unsure.

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
The shuddering can be two things, one what you said and two hotspots on the flywheel cause by bad clutch use..

another sign if your clutch is gone or going is pedal may feel soft and spongy on pressing to the floor and as what another member said revs go up but go know where.Best to get a mechanic or a member to have a look for you if unsure.

Im pretty sure its fine and its just me. I had the car serviced recently and alfa romeo service center checks absolutely everything and said nothing about the clutch.

The only thing that craps me is that it shutters when the car gets under 20km in second gear and 5km in first gear. Its not a bad shutter but in traffic its annoying lol

Revhead Grand Master

Revhead

Posted
Posted
Im pretty sure its fine and its just me. I had the car serviced recently and alfa romeo service center checks absolutely everything and said nothing about the clutch.

The only thing that craps me is that it shutters when the car gets under 20km in second gear and 5km in first gear. Its not a bad shutter but in traffic its annoying lol

Is this with the clutch out, ie you're still in gear and doing 20 in second gear? It could just be that the engine is a little bit rough at very low rpm, it might not actually be anything to do with your clutch
AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
Is this with the clutch out, ie you're still in gear and doing 20 in second gear? It could just be that the engine is a little bit rough at very low rpm, it might not actually be anything to do with your clutch

Yeah it is, with the clutch out, and engine is a bit rough, i tried yelling at it yesterday but didnt fix the problem ahhahaha. Its fine its just the engine i just press the cluch a bit earlier before i usually do to stop and problem is fixed :D

Thanks everyone for contributing.

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
yeah i agree with Revhead, you sure your not just in to higher gear and just boarding on stalling it?

and Col, thats sounds like a scary story mate.

See im not a 100%, it probably is bordering to stall, for some reason i just expect it to be able to go super slow without shuddering. I had a new car ages ago and that thing could litrelly go at like 2km's an hour without shuddering this isnt so new, so its probably just about to stall lol, but i always catch it ahahahha

jase-r34 Mentor

jase-r34

Posted
Posted

Gday mate,

A quick test you can try to see if the clutch is goneski is by starting her up, putting it in 3rd and pull on the handbrake. Lift the revs up a bit and try to ride the clutch out a little. It should stall pretty much straight away. If it doesnt then your clutch is slipping its head off.... just like my corolla's is! lol

Hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      I forgot about my shiny new plates!
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...