Jump to content
SAU Community

Recommended Posts

I think I've got it down to two places I'll be calling to get my 100,000Km service done... ...all depending on time off the road and time I can get off work because I use my car for work...

But I'd like to know who people recommend for such a big service... ...and what needs to be closely looked at...

I might still go to my regular guy... ...but they mostly do holdens and fords and there are four other cars from my family that go there as well as about 7 others from the neighbors... ...So they do have me covered or basic services... ...and I'm sure they could do it too... ...But I was just thinking that there are more Nissan orientated workshops out there that would have a better idea of what to look for on a big service...

Thanks in advanced for your suggestions...

Link to comment
https://www.sau.com.au/forums/topic/230807-100000km-service/
Share on other sites

depends on who you ask and what workshop

expect around $1100 for the whole thing

timing belt & tensioner bolts and bits

100,000 service

water pump

all fluids etc so its a big job

the timing belt supplied and fitted is approx $450 ish ballpark (lots of labour)

Here is what I can think of,

Oil

Oil filter

Air filter / Clean pods

Fuel filter

Battery (If you think is getting old)

Radiator Coolent Flush

Brake pads / Machine Disks (If worn)

Timing Belts / Fan Belts

Spark Plugs

Check all your tyres (Change if worn)

Gear Box oil (If had not been done)

Check under the car / drivetrain

And do the genaral service look over.

Its a big one for service. TGS Performance and Le Mans Automotive are to places I take my car to.

depends on who you ask and what workshop

expect around $1100 for the whole thing

timing belt & tensioner bolts and bits

100,000 service

water pump

all fluids etc so its a big job

the timing belt supplied and fitted is approx $450 ish ballpark (lots of labour)

paid around that, full timing kit, water pump, fuel filter etc.

think it was only with them overnight.

Went to Nissco in bayswater, Randy is the only man to touch my cars and my familys.

9761 4743, 2halbert rd, bayswater

www.nissco.com.au

Ryan sent ya and he'll look after you!

-Ryan

Edited by Ryan1600

yeahh i got quoted around 1k 2 do 100'000km service...

but they looked and said it had already been replaced and i just recently changed oil, fuel filter, spark plugs so i jus got them to do a minor service and change oil filter, coolent flush.

couldnt believe it when i heard $1000+ :D

i assume a 200k service is the same as 100k?

mine is due for 200k

anyone got any info on a 200k service?

std factory items (200k old): water pump, oil pump, turbo, all internals and usual junk & new coils

what really needs doing? ie: what is at risk of failure

i dont want any more power

bit of a bugger hey, water pump & oil pump in parts alone is nearly $1k all up ?

but if dont replace them and either fails then you risk the engine - bah hum bug

likewise with the turbo too i spose, if i dont replace it and the exhaust wheel dies then it can risk taking the engine and new internals with it

bugger

yeah turbo is an interesting one.

i mean any 2nd hander you get is going to have what, min 100k on it realistically. ;)

oil/water wont come to 1k, well... i suppose in total with labour and so on your over 1k :(

UAS do the cheapest pricing for that kinda stuff (pumps) so check em out

damn thats a hefty 200,000 service cost then

if i replace all the items at risk

timing belt change (as part of normal X00,000 service)

standard X00,000 service fluids, etc

oil pump

water pump

would it be needed to replace pistons here or stock ones are ok even at 200,000?

now lets say i just drive it till the timing belt snaps

its likely to mash the valves and pistons

so it would be the same as above, plus pistons and valves

  • 7 months later...

my 200,000 got done today

i did the oil and oil filter last week

new timing belt done

new water pump (current one is leaking, otherwise would have kept it)

VERY competitive pricing and fast as too (lov'in it)

thanks to EAS in airport west

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...