Jump to content
SAU Community

Recommended Posts

just bought a r33 gtr vspec series 2 and only has a catback exhaust.

What would be its potential down the 1/4 the way it is now

and what would the potential be with just 12psi boost, hiflow panel filter and a full exhaust

average driver: ?

good driver: ?

i couldnt find much info regarding this

out the box GTR Nissan quoted a 13.2 I think, so you would say around a low 13.

vspec slightly heavier but then you have an exhaust which should give you more torque and power (a little anyway) so that may counter the extra weight of the v-spec.

Obviously this would have been with a gun jap driver.

i think you could safely say with fliter and exhaust and no tune, you should hit a low to mid 13 without too much drama.

Any faster and you will need to look at a tune to get things working properly and then flat 13's, high 12's would be attainable.

Then add dollars to take off time, one you get to low 12's, high 11's, talk big dollars for each 10th of a second you want to shave

Edited by R34kid

Refer too what time will my car run thread,........ 14.0 @98mph

just bought a r33 gtr vspec series 2 and only has a catback exhaust.

What would be its potential down the 1/4 the way it is now

and what would the potential be with just 12psi boost, hiflow panel filter and a full exhaust

average driver: ?

good driver: ?

i couldnt find much info regarding this

haha I thought I would be a little more genuine than sarcastic.... When I first read I thought exactly that, but then broke it down a little more and though take the average run of the mill etc.....

if he drives like my sister, erm about a week.... or worse still will dump the clutch forget she had it in reverse and take out the car staging behind..... DOH

  • 4 months later...
  • 3 weeks later...

Now with larger turbos and more power my goal is a high 11 second pass on 20inch rims. How much power is required to do this?

I ran a 12.9 sec pass with the 20in rims with the same mods in above post.

so a .3 difference.

What are your thoughts. Can this be done? And if anyone has done it would be good to know.

The bigger rims will give you a larger rolling diameter & more weight generally, thus slowing down the time gain from extra boost. For the drag strip, use the stock rims with a GOOD set of tyres & the time will be much better, & it will put less stress on the drivetrain as a whole. Stick the 20s back on for cruising bling.

  • 3 months later...
he hit high 12's while everyone was saying 14 flat ??

you did pretty good mate. im running mine tomorrow. so hopefully i do a 13 :D

We say that so you aren't tempted to be a retard and actually go to the drag strip instead of walking around telling various people what your car "would run".

It's a public service we offer here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...