Jump to content
SAU Community

Recommended Posts

Panel Shop 1 – "Insert big name panel shop here" – Honda CRX Respray

On advice from a lot of people, I convinced my wife that removed was the way to go for a respray on her CRX that had badly worn paint and needed some minor accident repair. We took the car in and negotiated with the owner to totally respray the car in factory white and colour code the side skirts. Basic stuff. We were promised 4 weeks turn around and quoted $2000 + the insurance claim to do the lot. All good.

4 weeks later, the promises start. If I could get them on the phone, they would say “pick it up tomorrow” then they cancelled. Same thing happened for the next week most days.

Finally picked up the car a week late, after waiting around for literally ½ a day till they got it finally cleaned and ready. Go to drive the car, and the plugs are full of water. Like totally full! And then it really got nasty. There were a full page of imperfections from massive tape lines, to dents, to misaligned bumper, etc. Basically things that should have been fixed in the process. Another 2 weeks later of being stuffed around in the same way, interrupting my work, promising that it will be ready then canceling on me, we are told that it is finally ready. On picking it up, there are still 2 dents that haven’t been fixed. Pathetic. I went to make the final payment and their Eftpos / credit card machine is conveniently stuffed and I have to trudge up to the nearest ATM to get cash out. Finally got the car back and still not happy but at least I don’t have to deal with these people again!

Panel Shop 2 – "Insert smaller Panel shop here" – R34 Aftermarket Front Bar Install

After the removed mess, my wife said we are only going to "Insert smaller Panel shop here" from now on. Now yes they are not cheap and I had to accept that the premium cost to paint and install that was quoted would be worth it, based on my wife’s feelings about the company. Eek!

So we dropped off my R34 last Saturday morning, with the bar still in the original box. I am approached by Joe, the company owner, who recognized me from Autosalon’s that I had attended years ago!

Joe went through the options I had on installing the bumper, including extra bracing, install of different mesh, and trimming of the “mouth” to fit a large front mount. All of which would be included in the original quote so there were no surprises.

So today, a week later as promised, I headed to Smooth, and low and behold a lovely clean R34 faced me ready to drive away with a perfectly fitted bumper. No bumps, imperfections, issues, or anything else to complain about. The finish is excellent and the colour matching is flawless. The bumper was mounted to all the factory holes and Joe personally mounted the front number plate on the spot to my specification. And they accept Credit Cards!

The morals of the story are:

- you get what you pay for

- your mates are not always right

- just because places have a big name, they are not always the best

- and finally listen to you wife!

If anyone wants the names of the shops above please PM me.

bumper2.jpg

bumper3.jpg

Link to comment
https://www.sau.com.au/forums/topic/231652-a-tale-of-2-panel-shops/
Share on other sites

can we name the good workshop?

X2

PM the dodgey shop name please.

Sorta goes to show, sometimes you jsut gotta wear the price tag with modded cars, as sometimes is only way to get a job done right. Too many dodgey businesses in operation in sydney IMO.

Hey Bryce

i know exactly what you mean. One of my friends went to a place to get a bodykit. She found the company in a tuners magazine so she thought that they were reliable. she wanted a custom bodykit made up and they said they could do exactly what she wanted for a certain amount of money and just 3 weeks.... 9 weeks later and the car looked like shit! random pieces of fiberglass screwed into the original bodykit, etc. they had no idea wat they were doing and didnt care. they ruined the stock bodykit by screwing into it everywhere.

she decided to take it to a more known shop. they said they could do exactly wat she wanted with spray in 2 weeks. and of course they made it! perfect job on the body kit, which is customised, not a mark on the paint and it all fit beautifully.

the first shop has closed themselves down because my friend took them to fair trading. but i wouldnt be surprised if the guys open up another shop under someone elses name.

EDIT: and just wanted to say that the front bar looks awesome mate! nice choice

Edited by auss13

It's one of those "funny" kind of situations that life spits out really.

"Do I go to the name shop for a name brand and get a cheaper price, or do I spend my money with a smaller shop who may have excellant service but charge more?"

Working in the auto parts business in Newcastle its a a question that comes up constantly from retail customers.

I don't know what it's like in Sydney, but up here its a good time for the retail customer to get really good quality work at a cheap price. The deals some of the smaller independant shops are willing to do just to help pay their employees are unbelievable.

It's always good to see that small business know the value of customer service.

  • 1 month later...
  • 1 month later...

Sorry for the late reply! The bar is a Impul genuine front bar. Very hard to get in Australia and this one was imported directly. I love the bar but it does sit a bit low and my drive way has cut it up a fair bit :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...