Jump to content
SAU Community

Recommended Posts

Hey memberinos! lol. I have a quick question and a sticky situation in which i want peoples opinions for what i should do.

Quite a while ago i purchsed myself a 'Trial style' Bonnet made of FRP fibreglass, and now that i have parts of my bodykit and i wish to apply them to my 34, i only recently found out that FRP is technically just as illegal as opposed to having a carbon fibre hood on your car (Victorian laws). Im not sure if this is true or false, and i kind of feel stupid for not knowing, but is this correct guys?

If it isn't well, problem solved already! But if its not the news i want to hear then here is the situation i mentioned above.

Even if its technically illegal, (as most of us would), i still wish to use it in conjunction with my kit i purchased, the situation is, if i do apply it is there a way to make the hood heavier? So if cops lift it theres some sort of metal sheet underneath? Also is there a way to talk your way out of having one of them on, has anyone tried?

I wanted to originally paint it black like a 'jdm style' 'white car black hood' look, but i was thinking this might attract even more attention, so i guess painting it white will reduce that risk a bit. What are peoples opinion on this? I know alot of people on the street have FRP parts, but knowing my luck i will get defected asap. What would you guys do? would you slap it on or just leave it stock?

Cheers, Josh

Link to comment
https://www.sau.com.au/forums/topic/232187-off-with-his-hood/
Share on other sites

Some fiberglass bonnets are ADR approved.. So you could find out whether it is.. then use it.. or sell and buy one that is.. or just use it..

i vote the later cause unless u got defects up the wazoo or a cranky cop u should be fine

when you get pulled over the cops wont touch your car they will get you to open close things (from what i have experienced and been told about). so you can pretend its a heavy bonnet when opening it lol

I had the same thoughts and questions when i was deciding what to do a while ago. Don't know if it matters but i'm in vic, and got an r33.

i had a lot of advice, much of which was crap, heard carbon fibre was no good but i didn't want that look on my ride anyway, heard fibreglass is no good, someone told me it shatters bad in an accident and someone else said it wont bend like steel and will come through your windscreen and decapitate you... in the end i didn't know who's advise to take so i did my own thing...

I kept my steel bonnet, cut some designs in it and fibreglassed it up from underneath and moulded a little on top, then painted the whole thing stock and it looks awesome and is still heavy like steel and original, even when you knock on it sounds the same etc. nobody has ever said anything about it.

hope this helps, maybe an idea for you?

Very soon be illegal in QLD? Change in standards?

Thats a pitty because they apparently spend alot of effort in obtaining approval and I was very keen on getting one eventually.

Any word on why they will no longer be legal in QLD?

You are correct they are QLD approved.

i got a fibreglass bonnet, havent been pulled over yet, and i just got back from a road trip from mackay to gold coast and back and heaps of driving around gold coast a few cops saw my car and did nothing, on my way down i was over taking a car end up doing 140 and the cops where coming the other way and still didnt pull me over :)

Very soon be illegal in QLD? Change in standards?

Thats a pitty because they apparently spend alot of effort in obtaining approval and I was very keen on getting one eventually.

Any word on why they will no longer be legal in QLD?

You are correct they are QLD approved.

Hey, nah no idea when its happening but it is in the works. hopefully they make an exception for companys and ppl in QLD who have these kits. but i doubt it. i wanted 1 as an alternative cos i had a small accident and we worked out that it would be cheaper to get another bonnet then repair it.

regards chris

i wonder if you are in QLD, and have already purchased and installed an adr approved fibreglass bonnet, because the authorities told you it's legal, (and there was a cupcake party with balloons and shit, and ppl hugging eachother with big smiles, like a massive modifier's love fest - this part may not have happened) would you now be required to remove it? or would there have to be an allowance for bonnets fitted prior to the new laws. and if the latter, how would they know anyway?

i went through this, BLITS are not ADR approved, THey are aproved by the QLD transport auth not ADR's. QLD is the only state were u can use a Blits bonnet legaly and very soon they will be illeagle in QLD too. sorry but thats the facts

This is Wendy Owner of BLITS where did you get your facts from I would be very interested to hear where you got this information from as you seem to know more than we do we would appreciate you contacting us for a further discussion on this matter as it cannot go unnoticed and you need to make sure that what you say on forums like this is actual fact not just what you believe , will be waiting for you call on 0413749133 or work 07 55716122 and ask for me Wendy

lol busted... :D

i had a non approved fiberglass bonnet on my vt for yonks and yonks and even got pulled over.. never a mention on it..

i was told about this whole fiberglass through the window shit.. well if you crash at high enough sppeds to send fiberglass into you through the window then face it.. something else would f**k you anyways..

if its adr approved you can get a mod plate for it which should mean you shouldnt have to take it off..

adr wouldnt be approving items they were thinking of making illegal anyways.. blits and dmd both have adr approved bonnets.. but yes it is also best to check with ur states transport rules

Edited by .:: GimpS-R34 ::.
lol busted... :D

i had a non approved fiberglass bonnet on my vt for yonks and yonks and even got pulled over.. never a mention on it..

i was told about this whole fiberglass through the window shit.. well if you crash at high enough sppeds to send fiberglass into you through the window then face it.. something else would f**k you anyways..

if its adr approved you can get a mod plate for it which should mean you shouldnt have to take it off..

adr wouldnt be approving items they were thinking of making illegal anyways.. blits and dmd both have adr approved bonnets.. but yes it is also best to check with ur states transport rules

DMD are one of the agents for BLITS bonnets

the BLITS bonnets have been tested using the ADR specifications and they have been passed by Queensland transport for street legal use and don't need mod plates

some states don't require approval but this is going to change and we are working with them to comply with their regulations to get approval in every state

This is Wendy Owner of BLITS where did you get your facts from I would be very interested to hear where you got this information from as you seem to know more than we do we would appreciate you contacting us for a further discussion on this matter as it cannot go unnoticed and you need to make sure that what you say on forums like this is actual fact not just what you believe , will be waiting for you call on 0413749133 or work 07 55716122 and ask for me Wendy

Hey Wendy, u got Pm. if what i have said is incorrect my appoligies and please clear up the confusion. At no point was it my intention to discredit you or your company as i have based my statement only on what the WA roads technical department advised me although this could be incorrect. unlike some people im more then willing to admit if i'm wrong.

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...