Jump to content
SAU Community

Recommended Posts

Nissan do this, it means you have the special million dollar winning car,

Nah, but unscrew the 4 screws in the speedo, pull it out, check the speedo cable is plugged in properly, if it is, then check the sensor at the other end(gearbox end is still working, follow the cable up, sometimes they snap, if it's buggered just get a new speedo cable, if it's not, then you might need to take it to a mechanic, something must be stopping it from spinning)

If the speedo and P/S are still working, then it shouldn't be a problem with the cable.

The Japanese seem less opposed to fiddling odometers (winding them back). It's possible some sort of damage was done that prevents the odometer going past 100k.

I have the same problem as mine started to play up at 75000kms and fixed itself.

It has now hit 80000kms and wont budge, even the trip meter has stopped.

So I pulled it apart today and had a look seemed easy enough but I couldn't find anything wrong so I just pushed the odometer numbers gently past 80000 with a small screwdriver.

Dunno if this has worked yet as my radiator is out and I cant drive it.

Will let you know as soon as I do tho.

On a side note my boost guage seems to be playing up.

When Im idling the guage reads 0 pressure not vacuum, but when I start to boost it it climbs up.

Also noticed that when the car is off it falls down to 7 deg vacuum.

Any ideas????

I have exactly the same problem.......

the ODO meter stop when reaching 89999kms

yes, four 9 and doesn't go past the 90000kms!

and the trip meter also stopped........

I opened it up and can see nothing wrong

went to wrecker to buy a used one.

realise that the one I had......doesn't have the P, R, N, D, 1, 2......at the centre......

so I am guessing it is for a manual car

and now maybe I could understand why the O/D light doesn't turn on

so what's the reason behind the not running odometer?

i heard that when your car is moving, you shouldn't reset the trip meter..........but I need confirmation about that lol

and also I think it stopped before I reset -_-"

This is what we were concerned about at 5 mins to midnight on 31/12/99 eh?

Had an N13 that did the same thing, and after about 2 months, the odo moved on. Might have been after speed hump rather than a chicane.... Silly isn't it!

Rubber Mallet? I'll LOL if that works!

the car's odometer just stopped in shock when it realised it was the second time it had clicked over 100,000klm :( I guess they wound it back a fair way.

no idea how to fix it but it is pretty common with these cars

pull it apart and look for the cogs from memory there is one white one and severl black ones, check to see if they are all lined up and "meshing" nicely in there, also make sure no damage to the shaft and that everything is plugged in! Gl hame.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You've got yourself a good old game of have fun. That shit is annoying as hell to remove. Thankfully for you, yours is on metal, most of the stuff I take it off is plastic, so typically hear guns are out. I normally end up continually dragging my thumb with pressure over it to get it to peel up. Eucalyptus oil then works well for getting residue and last remnants off.   Edit: plastic scraper might be worth while too. One that'll dig into the foam tape, but not scratch the paint.
    • So I ride and race motorcycles for fun and have always used a van to transport my track weapons. Figured towing a racebike with a skyline would be different and if done right could - "look fully sik" or quite cool for us grown ups lol. Pic of yours truly on two wheels I also have a trailer already kitted out to transport my bikes ...and I have a spare set of rims that match the car that I was going to rebarrel to get deeper dish at some stage but they have just been gathering dust. Sooooooo it is only logical.... Stay tuned !!    
    • If by "flap disc" you meant "chocolate wheel".... then they are OK for getting off stubborn remnants. But not for stuff with bulk depth. If by "flap disc" you meant "abrasive paint f**ker"....
    • Beauty, thanks guys, got some ideas now. I note that none of you agreed with the flap disc so that's good to know. 👌🏻
    • I had small pin holes in my glazing putty but didn't want to put more putty to not make a mess again and I put 2 coats of epoxy primer to prevent it from rust. Though you can only see the pin holes if your eyes are almost against the panel. Do you think when the 3x coats of high fill 2k primer and 2 base coats go on that it will be visible? 
×
×
  • Create New...