Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

So, I've been out of bikes for a long time (10ish years, since school... oh god I'm getting old :P) and the other day I went out and bought myself one of these -

cannondale-f6-disc-2008-mountain-bike.jpg

Cannondale F6 hardtail.

Same colour as the one in the picture, except mine's got V-brakes instead of cable discs. Could have had it in red but my car's red so I wanted something different :)

Picked it up for $750, but have had the bike shop retrofit a lockout on the front suspension and changed the tyres to something slightly better for the road. The idea is to use the bike for riding to work and also for some light trail work out in the forest, hance why I got a mountain bike instead of a road bike.

I don't really know that I've gotten a good bike for what I paid so any feedback by those more knowledgeable would be good :)

I test rode this one and a $1,000 Avanti and chose the Cannondale because it felt lighter and came with a 15-year frame warranty as opposed to a 5-year warranty with the Avanti. They felt pretty much the same to ride. The Avanti had a bit better brakes but that's about all I could distinguish.

to be honest, frame warranties aren't worth looking at. as long as it is at least 12 months you will be fine. they are only for manufacturer defects which should either be picked up before it leaves the shop or within the first few rides. also cannondale are pretty shocking when it comes to warranty claims. because they have such a reputable name, they don't give a shit about warranty because they know that no matter how shit their service is people will still buy their bikes.

the same goes for their pricing. sure they are good bikes, but they charge you top dollar. $750 isn't a bad price though. that is partly because (i'm 99% sure) the F6 is an 08 model not an 09 (don't think they did it this year) so it hasn't been subject to price rises like the 09 stuff. so compared to 09 stock it is well priced, but compared to other 08 stock (when both at RRP) it lacks behind a bit in the quality of components

yea price for that is fine in this day n age - besides truth be told for what a bike does - which is... commute and get you fit and burn fat... in my eyes there really is no "expensive" and "cheap"

you get what you pay for, you want cable discs? pay for them, hyrdo discs? pay for them too, remote lockout? pay for it

etc etc

cars

now THEY are a waste of money.

Because it will break sooner, because they used cheaper parts, therefore keeping marc in business.

OR

It will be just as good, because you aren't paying for Lance Armstrongs prosthetic testicle via sponsorship money.

if they are the same spec (meaning same model gears, etc) then the extra money is simply going into someones pocket other than your own.

that is why when someone says that a certain brand bikes are shit, it is pretty stupid, especially in the higher end stuff where they will all be pretty much running the same gear (including frames).

hey guys,

im just wondering if any of you know the maximum tyre width that can be used on a

2006 Apollo Altitude XC ??

Because im looking at getting these 2.5inch wide Maxxis Hookworm street tyres

but i want to know if they will fit http://www.maxxis.com/Bicycle/Urban/Hookworm.aspx

i have 1.95's on it now and about 5cm on either side of the tyre before it reaches the frame.

cheers

you MAY fit 2.5's on, but there is a very good chance they will rub the frame, and if you ever get the slightest buckle they will rub. also i think you might be a bit off with your 5cm each side of the current tyre as your current tyre will only be 5cm wide so you are saying that you have the same size gap on each side of your tyre as the width of your tyre.

and i just measured up a 2009 altitude and it would come pretty close to scrubbing both sides.

but why do you want such fat tyres? they will make you roll much slower than what you currently have. if you are only riding on the road look at either the ones rowan linked or something like the michelin XC or XCR road tyres (pretty much the same as the maxxis ones rowan linked) or the new michelin city if you want something a bit wider in a slick. or look at some of the touring tyres from conti.

i was just estimating with the 5cm, i havnt had the chance to ride my bike in ages

i wanted them because my mate had them on his 06 GT Chucker 2.0 and they were heaps good,

last really long, we were like going flat out, locking on the rears and doin 20 metre fishies and the tyre would barely loose any rubber. My tyres on the other hand last about 10 good skids before i pop them, which sucks.

But its not all about skids

the main thing is the wear factor

i want it to take the abuse that i dish out (on road, off road, tricks, skids)

but still last for a while

ill have a look at both of them next time i go down to the bike shop

Edited by Mr Holden

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...