Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

well the 5.5 figure was based on the following calculation

step one

jump on scales

step two

read scaled weight of my own weight

three pick up bike

four jump back on scales

five subtract my human weight and be left with the bike wieight - which according to scales, was 5.5kg - which im sure is inaccurate figure

and not to disagree but picking it up it defs doesn't weigh 7 or higher you can lift it effortlessly with one finger

either way who cares

and to stop a fix gear bike you either skid by locking out your knees and pushing back on your back foot.. or

you just slow down your pedalling by gently pressing back on the pedals

both are very bad for your knees - also another thing to take into account riding fixgear, is if the wheels are turning, the pedals are turning too. so that means... if you're turning. you're pedalling.

if your turning - hard. you're leaning... hard...

hard leaning and flaining pedals is not good fun should your pedal contact the bitumen.

=)

more colourful love..

8d2a3_4114658564_f84550da30_b.jpg

31479_SNC107311.JPG.jpeg

vans-fuji-track-bike-1-540x303-494x277.jpg

continuum-bicycles.jpg

cdale-v3_4.jpg

cannondaleTrack.jpg

few more variants of the capo

CIMG2861-1.jpg

capo13.6resize.jpg

Capo_014.jpg

Cherry1.jpg

Edited by Mr Eps

I've got 2 road bikes and 2 MTB's.

I've got a Time Edge road bike w/ Campy Chorus and Easton wheels. Great bike. Also a Steel SS for commuting and training.

I've got a Cannondale Caffeine w/ a lefty fork for XC riding/mild trails, and a Nicholai CC w/ a 15mm Talas fork and some nice custom wheels for a technical riding. Beautiful bike.

Build up everything myself except the Cannondale. Love meching on my bikes and stuff. Nobody touches them but me. It's all in the small things.

I used to live to cycle. I was riding 20 hrs a week in 2008 then fcuked by back up and can't ride properly now. Had an MRI but just some minor disk protrusion and nothing that 'should' stop me riding. Need to chase this back up w/ my sports doc once I recover from my shoulder surgery 'cos can't live w/out cycling. :rolleyes: Fcuking depressed about it.

Edited by Tony de Wonderful

did a bit of research. the capo comes in at around 19 pounds. that's 8.6kg, which is still rather light, but about where i thought it would be. bikes are very decieving with their weight. 8kg can feel much lighter because it is on a bigger item, yet if you put 8kg into someone the size of a football it will feel much heavier.

and since i'm bored, to give you an idea of weights (all weights from manufacturer's websites):

wheels: 1995g pair

tyres: 350g each

cranks: 741g with 2 chainrings. second chainring only adds approx 50g

BB: 160 to 300g depending on model used

handlebars: 680g

stem: 180g

seat post: 345g

chain: approx 300g

so without frame, forks, pedals, freewheel, headset, brakes, seat, and grips you are up around 5kg. frame and forks would weigh close to 2kg. i have done a few build-ups using kitchen scales to weigh parts before putting the bike together and you get shocked the first time you do it. you pick the bike up and think it's really light and then tally up the weights and find that while it is light in comparison to other bikes, the actual weight of it is pretty high. the wheels are always the heaviest part of the bike.

also an interesting fact: the UCI (world cycling body) has a minimum weight that bikes must be to compete. it is 15lbs, which is around 6.8kg.

i cruise at about 35/45kmh most times so if fixie riders wanna tease me for riding with brakes and freewheel then be my guest and settle it in a race.

Hmmm 35 to 45 kmh? Solo?

35 maybe if you are a quite fit club rider. I'd still call that tempo really.

When I was living in Scotland in 07/08 I'd do 100 mile solo training riders at ~30 kmh.

Now if you can do a 40 k in 1 hr that is getting quite decent. That is not cruising by any means though.

Of course average speed is effected by many things..winds, road quality blah blah,. but there is no way you 'cruise' at 45 k/hr even as an elite rider.

Not a big fixie fan to be honest. I've got my SS and I used to train on that. I like brakes and ability to free wheel when I need it. Can't tolerate the 'cool fixie brigade'.

Edited by Tony de Wonderful

fyi, i just accidently watched a rogercordia video on youtube so i'm in a bad mood now

something else that shits me off about the current fixy trend is that people call them fixy's even if they aren't fixed wheel. if they have a freewheel they are single speeds and have been around for quite a few years now, but were generally mtb's or 26 or 29" bmx bikes with the odd road bike version. just because it can have a fixed wheel attached to it doesn't automatically make it a fixy. if you are running the freewheel then it is a single speed.

and technically 'fixy' isn't a new category of bike. they are just track bikes with brakes added to make them legal (if they have brakes). some will be done with retro styling to make them look like bikes that were around 50 years ago. even flat bar fixies aren't new. all that is different is that the original ones had bars shaped like a boomerang and the new ones have mtb bars on them. so to anyone that is riding a fixy to be different, you aren't different, you are just 40 years behind the rest of us. what next? is holden going to bring back the FJ and revive the old 186 and 202 engines to put in them? would they expect people to go and buy a car that handles like rhino on ice and has a 3.3L 6 cylinder engine that can put out an impressive 80kw? no. everyone would think it is a bucket of shit and not touch it. but apprently the cycling world is different. what was once shit and hopeless is now shit and hopeless but cool.

maybe i should see the guy i sed to work with who still has his original fixed wheel racer from when he raced back in the 60's so i can be cool. in fact i would be super cool because it even has a bent frame and forks from being crashed, meaning that when you turn the pedals nearly hit the front tyre because it sits about 2" back from where it should.

fyi, i just accidently watched a rogercordia video on youtube so i'm in a bad mood now

something else that shits me off about the current fixy trend is that people call them fixy's even if they aren't fixed wheel. if they have a freewheel they are single speeds and have been around for quite a few years now, but were generally mtb's or 26 or 29" bmx bikes with the odd road bike version. just because it can have a fixed wheel attached to it doesn't automatically make it a fixy. if you are running the freewheel then it is a single speed.

and technically 'fixy' isn't a new category of bike. they are just track bikes with brakes added to make them legal (if they have brakes). some will be done with retro styling to make them look like bikes that were around 50 years ago. even flat bar fixies aren't new. all that is different is that the original ones had bars shaped like a boomerang and the new ones have mtb bars on them. so to anyone that is riding a fixy to be different, you aren't different, you are just 40 years behind the rest of us. what next? is holden going to bring back the FJ and revive the old 186 and 202 engines to put in them? would they expect people to go and buy a car that handles like rhino on ice and has a 3.3L 6 cylinder engine that can put out an impressive 80kw? no. everyone would think it is a bucket of shit and not touch it. but apprently the cycling world is different. what was once shit and hopeless is now shit and hopeless but cool.

maybe i should see the guy i sed to work with who still has his original fixed wheel racer from when he raced back in the 60's so i can be cool. in fact i would be super cool because it even has a bent frame and forks from being crashed, meaning that when you turn the pedals nearly hit the front tyre because it sits about 2" back from where it should.

Point taken, i just like the look of simplicity... none of these fking gear levers and so on... pure, unadultered simplicity... :action-smiley-069:

i used to ride brakeless so that i could feel when i was going to fall over when pulling a manual..

so scary.

oh yeah, and i've never ridden a fixie, does the hub that locks up when i backpedal count? what was that, the geisha?

Edited by xALmoN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...