Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

craz0

so now with the pfc in everything is fine and all u had to do was plug in with no extra wiring or mods to to the unit or wiring to make it work with the auto?

the only issue u have is the power light flashing?

steve-sst

how much is a wolf plugin worth for a r33 auto gts-t?

and who can tune it in sydney?

and as craz0 said when you installed the wolf into the auto r33 did u notice the power button flashing/going through the diagnostics?

Originally posted by walkoau

craz0

so now with the pfc in everything is fine and all u had to do was plug in with no extra wiring or mods to the unit or wiring to make it work with the auto?

the only issue u have is the power light flashing?

The PFC worked and you can drive the Car, but the Auto speed button would flash 16 times (all fast) and when you run the Auto through diagnostic mode the third flash would be long (Throttle sensor shorted or disconnected) so the Auto needs the TPS signal to work properly, when I took it for a drive it would hold out through the gears (e.g. would change from first to second at about 3500rpm with your foot just on the accelerator where it would normally change under 2000rpm) after braking/cornering and then accelerating it seem to be in the right gear (like it wasn't fishing for a gear), It kicked back gears fine as well. When it did change from first to second it was harsh (like when you put your foot down from first to second and it gives you that kick but just not as fast and no wheel spin :P)

I can't seem to find a pin layout for the actual Auto ECU either.

Does anyone know what info Pins 5, 14 and 15 push from the main ECU? all three of these go straight to the Auto ECU.

I'm figuring they push the TPS and maybe Tacho signals so the Auto ECU can figure out when to change.

I've attached a pic of the three wires going into the Auto ECU.

Just seeing if anyone knows for sure.

  • 1 month later...

Ok i got the wolf plug-in and I pluged it in and the car didn't want to start and when it did it coughed and farted and blow dark black smoke and the lights on the ECU looked like Christmas lights going of,so I turned it of :confused: don't know what happened here.

The user manual I got with the ECU is for the normal Ver 4 but not the Plug-in version, I've contacted Wolf about this and I'm waiting on a reply.

Steve-SST do you know if there is different versions of the plug-ins at all? mine has (rev 5) on it, also the PC software I got for it is Ver 4.49 what version are you currently using?

So the MAP sensor has to be conected for it to work properly? so where is the best place to hook in the map sensor line? the fuel presure reg line?

Can you still leave the AFM hooked up or do you have to remove that as well?

My car is a 93 R33 RB25DET Auto everything is stock other then a Jamex filter in the original box and I run it on Optimax.

Steve Taylor sent me the first draft of the Installation Manual for the R32/R33 GTST Plug-In ECU, I haven't had the chance to read over it yet and the manual isn't quite finished.

Thanks heaps for your help.

My Email

Originally posted by GTS-t VSPEC

You can still leave the AFM in if you want, but just make sure in the software to choose MAP sensor. Try and get a clean plenum line if possible for the MAP.

What do you mean by "Try and get a clean plenum line if possible for the MAP"?

Where did you get your line plumed into?

Thanks GTS-t VSPEC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...