Jump to content
SAU Community

Wolf3D with Auto R33 GTS-T

craz0

By craz0,
in Engines & Forced Induction

 Share

Recommended Posts

N I B Grand Master

N I B

Posted
Posted
Sorry to kidnap your thread craz0 but this will only take a sec...

Steve-SST: Does the wolf plugin use the AFM for tuning?  If it won't idle without the MAP plumbed in, I'm assuming it doesn't?

Plugins come with a MAP tune but they have a MAF function but every ones used the MAP sensor.I will tune one on the MAF to get a base map if any one wants to use the MAF, but why bother.

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

  • 2 weeks later...
craz0 Proficient

craz0

Posted
  • Author
Posted

I hooked up the Wolf 3D and it doesn't want to start everything seems to be fine, I pluged in the MAP sensor and nothing, the Injector lights on the side of the ECU dont flash at all. Anyone got any ideas?

The picture attached does anyone know what it is? when I have the Wolf pluged in it you can hear it motoring away with the reds on but with the original ECU in it doesn't do it.

  • 4 weeks later...
craz0 Proficient

craz0

Posted
  • Author
Posted

The PFC will work fine with the manual because it doesn’t need the auto ECU as for witch one to use well that’s up to you and what your tuner knows.

They both work well the PFC just doesn't talk to the Auto ECU and the Wolf does.

kjb_r33 Experienced

kjb_r33

Posted
Posted

I was running a motec in my auto for a bit. The PCM gets its signal from the engine ECU for the lineal TPS and also the 3/4 throttle position for kick back. Its just a matter of bridging those across. OH, dont forget the speedo signal either.

  • 2 months later...
Edge Proficient

Edge

Posted
Posted

I can't get into diagnostics mode for the auto. I'm sure I followed the procedures.

I'm running a microtech lt-12 on a series 2 r33 auto. While it works fine when cold - as soon as it warms up the auto refuses to drop into first gear unless from a full stop, or I select it manually. Refuses to do kickdown reliably, it does kick down but not far enough. It always wants to run in 4th gear as well at low speeds. Seems like its always one gear two high.

I wonder if I need a series 1 auto computer?

Also on reading this thread - it seems I need to splice some wires, I havn't spliced anything

and been running for 2 months now.

I'll need to get more info on how to do this splicing.

  • 1 month later...
mx83toy Enthusiast

mx83toy

Posted
Posted

i dont know too much bout the skyline auto's but the toyota guys leave the standard comp in place and run another comp as a pigiback .... worked great in a mate cressida...

there is a guy that has built a unit (standalone from ecu) with two buttons upshift and downshift these shift the box for you and work great to but i dont know if it'll work with a skyline box (dont see why not)

only shit thing is it will always be like that as in you loose the "auto shift" most performance guyz dont mind though :)

craz0 Proficient

craz0

Posted
  • Author
Posted
i dont know too much bout the skyline auto's but the toyota guys leave the standard comp in place and run another comp as a pigiback .... worked great in a mate cressida...

there is a guy that has built a unit (standalone from ecu) with two buttons upshift and downshift these shift the box for you and work great to but i dont know if it'll work with a skyline box (dont see why not)

only shit thing is it will always be like that as in you loose the "auto shift" most performance guyz dont mind though :)

AP Engineering moddified the PFC to suite the auto Toyota JZX100's, so I would say that the Toyota Auto's would be easier to do. That or the Auto Toyota is more popular then a Auto Skyline and that's why they did it.

  • 1 month later...
  • 2 months later...
lukits01 Experienced

lukits01

Posted
Posted
Send me your specs and i will send you a good map with the Idle stepper setup also.

hey steve, do you mind if I get a map with the idle stepper setup as well?

Because ive plugged in my wolf and it runs the car fine, but it sometimes stalls on idle or at very low rpm. Just need a map so I can drive to the workshop safely :wassup: without having to worry when power steering is going to give out...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...