Jump to content
SAU Community

Recommended Posts

so just got some apexi air filters for my 32 gtr but being the noob i am, i can't actually figure out how to get the old air box out! did a bit of a search but couldn't really find anything surprisingly. any help? thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/233444-how-to-remove-air-filter-box/
Share on other sites

hey dude

cant be that hard...just take the four clips off the top part of the box...and unbolt the top AFM that goes into the box...cant rem if the bottom AFM attachs to the top or bottom half of the box..but u need to unbolt them either way...once the top is off n AFM....in the bottom bit from memory there was 2 bolts holding it in place in couple spots on the inside of the box..after u take the filter out u should see them.

yeah, i think the bottom afm must be attached to the top half too cuz i did disconnect the top one but it still wouldn't budge. now it's light out at least, should be a bit easier hopefully. cheers!

I think there is also a snorkle / air intake attatched to the bottom half of the air box..? Have a look, it could be stopping you from moving the air box and if so keep the snorkle so it feeds air to the APexi pods.

yeah, was gonna keep the snorkel. i don't see how you're supposed to get the bottom afm off. there's just no room. and not like 'trying to change the oil filter' no room. like actually no room. hrmm..

ok so it seems pretty much i have to move the outlet hose but after taking the hose clamp off it still won't budge. do i have to cut the zip ties around the insulating thingy? cuz they've got little clips on them that hold some other hoses. this seems a lot harder than it should be.

I don't think you have to cut or take off any hose clamps.

That insulant is just to stop the air box rubbing against the intercooler piping (If thats the one you are talking about?)

Does the Air Box look anyting like this... Its the only pic I can find ATM... I think its a pic from behind the air box...

post-46584-1219839983_thumb.jpg

Ah good you have a pic! LOL!

Well looks like you gota bit of fiddling around to do... I guess undo the bolts where the air flow metres are, also there might be a few bolts under the air box. So you might have to remove the front wheel and check behind the plastic tyre guard to see for any bolts.

You might even have to saw bit off to get it moving, but saw a little as posible.

My air box has already been removed but I can see a few bolt holes.

See how you go.

if i can just get that damn intercooler piping away from it then it'd be easy but the thing won't budge. maybe i'll try wedge it off somehow. but then i worry i won't be able to get it back on argh! thanks for the help though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox) They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox)
    • Inspiration: https://www.nissan-global.com/EN/HERITAGE_COLLECTION/Primera_GT.html    
    • Yeah, hard to find and a pain in the ass to change with the transverse engine. I’ve worked on a GTiR before and it’s not a job I’d ever want to do again. theres a company in South Africa that makes RS3 gearbox adaptors for the AWD SR20 including gearbox mounts, so I could modernise it and go a dual clutch with paddles. For now tho, it ticks all the boxes. Super cheap, can throw the kids and their junk in the back, and SR20 that I can turbo cheaply, a CVT that’s not a dog’s breakfast like the V35, and has 80% interchangeable parts with stuff I can source from the wreckers cheaply…. But it’s still unique. I love the wagon back of the Autech version. It’s cheap enough that I can buy another stock manual FWD Primera with SR20VE, swap the gearbox to the N15 pulsar short gear ratio box, swap out the brakes to the R32 ones I pulled off my 32, register it on club plates and take it racing. $1300 shipping from NZ. Heaps of parts and aftermarket builders for transverse SR20’s in NZ.
    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
×
×
  • Create New...