Jump to content
SAU Community

Recommended Posts

So heres the story.

My mate has his car at a workshop, (prefer not to name the workshop, as he has good rep and plenty of support on the site)

and while its in the mechanics possession, the car was left outside behind locked gates.

Now, the cars been broken into and 7k plus worth of goodies stolen from it.

The big question here is, who's at fault. The mechanic as its in his possession, or my mate as he left it w/ the mechanic.

Just like some feed back rom you guy's as the mechanic is taking no responsibility beacuse legally you leave your car agt a shop at your own risk?!?!?!???!?!?!?!

Any feed back wouyld be great

Link to comment
https://www.sau.com.au/forums/topic/233732-mechanic-troubles/
Share on other sites

  Johnny said:
I was under the impression that mechanics must have insurance for customers cars.

I have heard recently that this policy only applies within the work shop. Could be wrong.

Something similiar happened recently to Primal Garage and the customers car wasn't covered because it was outside.

If it's a reputable business, either way, I'm sure they'd have no problem footing the bill.

This happened to my mate as well. He left it at a workshop and they put it around the back behind locked gates. They broke in put his car on bricks stole his rims, his headunit and other crap. Think it woulda been an inside job. His insurance covered it

Unfortunately your mate will get nowhere chasing the workshop. Insurance for the car is the owner's responsibility, not the shops. They didn't breach their duty of care as it was behind gates, it's not like they just left it on the street. A workshop's insurance doesn't normally extend to the cars kept inside the grounds.

Read about what happened to Primal Garage when they got broken into.

Sorry to say.

Edited by llama_au

funny how when something like this happens, the workshop will wash their hands of all responsibility, but watch exercise a lien over your car [ie. keep it!] if you fail to come up with the cash at the end.

however, assuming they took reasonable steps to secure the car, i'd say they won't be forced to cough up. private insurance would be the way to go.

owner onus applies at all times, wherever you park your car

in the street, out the front of your house, at the carpark at the train station, at the shops, at a workshop, at the MCG

it doesnt matter - owner onus always applies

so your mate should make a claim with his insurance company and problem solved

  West said:
I believe the Workshop and its Insurer should be liable for it or at least pay for the stolen good at a good will, unless your mate's insurer is willing to cover the lost.

this is not possible, the workshop isn't liable in that way.

if the workshop is open to liable for this sort of thing you would have to sign an agreement at the time the car was taken into the workshop.

as no workshop in the right mind would take liabiltiy for a customers car regardless of where its stored it wouldnt apply

so if you take your car to workshop you should have insurance for it

Just like parking lots have 'conditions of entry', shouldnt workshop have something similar, at least a warning to the customer?, 'you can leave your car here but we are storing it outside'. The customer has a right to know i think.

I bet if this scenario happened to the people who have said 'vehicle owners problem' they would think differently. Defenitely.

I think 50/50 is fair, as its a fine line.

Sorry about your friends car. That really sucks.

I recently had to leave mine in the workshop. I specifically asked where it would be because someone could easily jump the fence and take what they wanted off it/out of it. We all know Skylines are targets so I would rather have taken it home and brought it back if it was to be outside because I dont leave my car anywhere, let alone overnight.

They said it would be locked inside the garage on the hoist because 'apparently' all the wheels were off and they couldnt get parts that day. I was fine with that, figured it was safe.

( btw, as a side note, it rained that night... )

Interestingly enough, when I picked it up the next day it was filthy ( you know, like say, it had been left out in the rain??? ) Lucky nothing happened to it, but I wasnt impressed because: a) I had just paid a fortune to have it professionally detailed 3 days before and: b) They told me it was going to be inside when it was just left out...

Good to know Im up for excess if something happens to it while in their grounds though, I didnt know that!

the first thing i said to him was go thru private insurance...

but being the smart intelligent boy he is, his wolf3d and cooler kit etc was not under insurance...

personally if a customer had just spent the best of 15k w/ me and something happend to his car like this

i'd be doing my best to meet him 1/2 way where i could... not go get my own lawyer in preperation for a battle...

There is a difference between parking a car in a car park, and leaving the car in someone elses possession.

The garage had the keys, they had taken temporary possession of the car. Failure to even use any security systems besides a $12 pad lock and some steel mesh would not seem adequate for most cars.

If your mate borrowed your car, and crashed it, He'd be liable, as it's in his possession, with, or without your permission.

A case could be made for either party, though I think it's a bit harsh for the workshop to park it wherever they like, then deny all responsibility when it goes pear shaped.

I'd be getting legal advice if I were you, but don't try and be a hard-arse, or think that you'll be able to sue them and retire rich. See if you can come to an agreement where the missing parts are replaced at a discounted rate, and you'll save yourself a lot of hassle. Threatening to sue and stuff only pisses people off more.

Mechanic is liable 100%.

They probably don't want to be liable, but they are.

  d_33vl_1 said:
So heres the story.

My mate has his car at a workshop, (prefer not to name the workshop, as he has good rep and plenty of support on the site)

and while its in the mechanics possession, the car was left outside behind locked gates.

Now, the cars been broken into and 7k plus worth of goodies stolen from it.

The big question here is, who's at fault. The mechanic as its in his possession, or my mate as he left it w/ the mechanic.

Just like some feed back rom you guy's as the mechanic is taking no responsibility beacuse legally you leave your car agt a shop at your own risk?!?!?!???!?!?!?!

Any feed back wouyld be great

  ~R33AzzA~ said:
I agree with Kozeyekan. Get some legal advice and try to negotiate an agreement of 50/50.

I actually had a chat to a lawyer friend and he said the mechanic was liable. He said something about it being a "bail-let" or "Bailent" or some other legal term.

It boils down to the fact that they took possession of the item, whilst doing services you were paying for. They were hired to do a service, and return the car in the same condition as it was when you deposited it (with whatever work done as you'd expect)

How the damage happened is largely irrelevant, it could be that when moving the car, they hit a pole, or that they had a portion of the roof collapse, it's all the same, or, as in this case, someone busted into it.

seek proper legal advice if they do not come to the party. I expect that they'd not want to go to court, as damages to the car is covered by insurance, your court costs (which you can recover in your suit) are not covered by most insurances.

Be cool though, don't go in expecting a pay day. Have a value on items to be replaced, and have that as your goal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...