Jump to content
SAU Community

Recommended Posts

hi all,

im new here first post so just a quick intro my name is Jay and im from southern suburb of victoria

anyway

just brought a R33 off a guy of these forums and one problem i have come across which the ex-owner said was normal, when i release the pedal two quick after accelrating the car just stalls and its an auto, he says its a typical problem with skylines it does have a blow off valve plumb back, anyone else encounter this and any way to over come it?

thanks in advance people

Jay

Link to comment
https://www.sau.com.au/forums/topic/234235-r33-auto-stalling/
Share on other sites

it does have a blow off valve plumb back

Do you mean that it doesn't have an aftermarket blow-off, and that it's still stock plumb-back, or that it doesn't have the plumb-back hose? Coz if it's the latter, theres your cause!

if it has an aftermarket BOV, whether it be plumbed back or not it is goin to stall when u accelerate at low speed and quickly release the throttle... mine does that as well. my R33 gtst is auto also and my bov is venting to atmosphere becuz i have put on new turbo setup...... but even before the new turbo setup when i put on the aftermarket BOV whether it was plumbed back or left to vent to atmosphere it would stall at low speed after quick acceleration and quick throttle release... it is a very common problem among automatic skylines with aftermarket blow off valves...... easy way to overcome this issue is to try and maintain revs above 1000rpm or if ur stuck in traffic slip it back into neutral until u need to creep forward then simply put it into drive and the car will roll forward once in gear.... otherwise get used to slipping it back into neutral and starting the car again..... hope this helped u

Thanks guys, im new to the turbo side of life always had honda vtec engines, but it is an aftermarketplumb back (drift to be exact) but thanks for info i will be abit more cautious now that i know what the problem in cuz it can get embarrasing lol

  • 3 months later...

Dont mean to dig up old topics but this happens to me.. i have a R33 AUTO with bov and turbo.. A good way to stop this is when u going fast and u release the accelerator or have to brake.. give it a couple little bursts of accelerator and it wont happen.. thats what stops mine from stalling and all the lights coming on and thinking ur car is f**ked lol :blink: but it isnt ..

hi all,

im new here first post so just a quick intro my name is Jay and im from southern suburb of victoria

anyway

just brought a R33 off a guy of these forums and one problem i have come across which the ex-owner said was normal, when i release the pedal two quick after accelrating the car just stalls and its an auto, he says its a typical problem with skylines it does have a blow off valve plumb back, anyone else encounter this and any way to over come it?

thanks in advance people

Jay

does it stall from "P" to "D" after start up?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...