Jump to content
SAU Community

Recommended Posts

yeh i was aware of that... which is why im really tryin to get it the a-lsd workin.. otherwise i was going to find a r33 being wrecked and hopefully replace the diff centre and the axles... i mentioned it a few posts back..

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Are you talking about your GTR diff^^^^?

Ive got some stock R33 gtr dumps if you want them. Theyre the cast things off the back of the turbine housings arent they. Just to clarify.

HR31 Diff, but same principle

yeh i was aware of that... which is why im really tryin to get it the a-lsd workin.. otherwise i was going to find a r33 being wrecked and hopefully replace the diff centre and the axles... i mentioned it a few posts back..

the clutch packs upgrade are for the mechanical type LSDs as found in 32 GTR not the A-LSD you have. yours may have clutch packs inside (i'm not 100% sure) but what it has is a friction fluid and a pump to adjust the fluid pressure, that's what makes it 'lock'. I don't think the nismo clutch pack upgrade will work in the A-LSD. often the problem is maybe the fluid needs changing, or the pump is worn out, or something else in the diff is worn out. I've never been a fan of the active LSD. too unpredictable, the last thing you want in a diff is it deciding to lock or unlock at various times, you just want it to operate the same way every time so you know what's coming!

the clutch packs upgrade are for the mechanical type LSDs as found in 32 GTR not the A-LSD you have. yours may have clutch packs inside (i'm not 100% sure) but what it has is a friction fluid and a pump to adjust the fluid pressure, that's what makes it 'lock'. I don't think the nismo clutch pack upgrade will work in the A-LSD. often the problem is maybe the fluid needs changing, or the pump is worn out, or something else in the diff is worn out. I've never been a fan of the active LSD. too unpredictable, the last thing you want in a diff is it deciding to lock or unlock at various times, you just want it to operate the same way every time so you know what's coming!

The alsd does have clutch packs, We have mine apart atm. I want this diff working again as its a far bigger stronger diff than the stock gtst number but its around a thousand bucks for a new clutch pack.

That may sway me to replacing diff and half shafts too.

fineline can you find out if it has the same clutch packs as the normal gtr diffs for me, i have changed my fluid on mine completely using both the bleeders..also what sort of condition are your clutch packs in?

Im also tryin to get mine working again, from what i can tell the lock between left and right wheels may be pressure dependant, meaning when there is no pressure all the power goes to the left wheel and as pressure is feed into the right side of the diff the power is transferred to the right wheel, and varying the pressure into the diff varies the torque distribution .. im basing this on that theres only one oil pressure feed into the diff and a feed that links them together.. It's really just a guess i may have to pull it apart to understand it more.. only other way to control the torque split would be electronically,

It's stupid the Japanese didnt make no v-spec manuals

I do agree with beer baron tho the unpredictability makes It pretty hard sometimes, when your drifting right it over steers heaps and to the left it under steers so much you end up doing a 3 lane drift

fineline can you find out if it has the same clutch packs as the normal gtr diffs for me, i have changed my fluid on mine completely using both the bleeders..also what sort of condition are your clutch packs in?

Im also tryin to get mine working again, from what i can tell the lock between left and right wheels may be pressure dependant, meaning when there is no pressure all the power goes to the left wheel and as pressure is feed into the right side of the diff the power is transferred to the right wheel, and varying the pressure into the diff varies the torque distribution .. im basing this on that theres only one oil pressure feed into the diff and a feed that links them together.. It's really just a guess i may have to pull it apart to understand it more.. only other way to control the torque split would be electronically,

It's stupid the Japanese didnt make no v-spec manuals

I do agree with beer baron tho the unpredictability makes It pretty hard sometimes, when your drifting right it over steers heaps and to the left it under steers so much you end up doing a 3 lane drift

My knowledge at this stage is very basic Jarrod. I believe from looking at the diff that what you are saying is correct. I have a diff mob up here going to take a bo peep at it with a view to shimming the clutchpak to extend its life so I'll wait for the verdict.

The other idea I find very intriguing, When the giant boys (russel and Mark) purchased the 33 they are building it came with a manually operated ALSD. The system from Russels description over the phone involves the use of a drift style hydraulic handbrake with a master cylinder and a cock to lock off the return when the desired pressure is reached.

In other words, pump the hydro handbrake to whatever pressure you determine and hold it whilst you turn off the cock to stop the pressure bleeding back off and hey, PRESTO!

It sounds simple enough and once you determined the amount of pressure required you could set the diff as a 1.5 way or 2 way etc.

If the diff boys tell me the clutch pack in my diff is acceptable I am going to explore this option further. An added bonus would be the removal of the motors pumps etc that drive the diff.

yeh ill be interested to hear more about this, sounds like a good idea.. maybe theres another way to pump up the pressure with the use of a switch to turn it from one wheel to lockd.. definately sounds like its not a problem with the clutch packs themself slipping.. either a sensor or pressure problem.. going to take it for abit of a spin tonight to see if theres an improvement since i flushed out the hydraulic fluid from the diff

jarrod, try asking Moanie on here about her car

she has an r33 with alsd and got rid of it and now has a good mechanical diff at the back end

i would give up on the alsd, its an expencive hi-tech heap of shit pretty much, even when working "like it should" it will dissapoint 90% of the time

Ill try and work out how to give her a msg to find out what she needed to replace.. but i have to disagree with you cerci back when i first imported my car when she was near new like.. the active lsd was a joy to drive.. its hard to describe but you could thru it so hard into a corner n it drift lovely.. and when cornering hard it seem to power the outside wheel more n get you around more easy.. but if u do just lock it, its going to lose that capability

hopefully my cousin pikd up this wreck r33 for a engine swap his doing and i was hoping to pick the diff up from that.. but i want to at least attempt myself to see if i can get this diff working before i junk yard a 5000 diff ¬_¬

they do a good job tho at preventing troubleshooting of this diff =P

Cheers for the advice tho guys

  • 2 months later...
  • 2 months later...
My knowledge at this stage is very basic Jarrod. I believe from looking at the diff that what you are saying is correct. I have a diff mob up here going to take a bo peep at it with a view to shimming the clutchpak to extend its life so I'll wait for the verdict.

The other idea I find very intriguing, When the giant boys (russel and Mark) purchased the 33 they are building it came with a manually operated ALSD. The system from Russels description over the phone involves the use of a drift style hydraulic handbrake with a master cylinder and a cock to lock off the return when the desired pressure is reached.

In other words, pump the hydro handbrake to whatever pressure you determine and hold it whilst you turn off the cock to stop the pressure bleeding back off and hey, PRESTO!

It sounds simple enough and once you determined the amount of pressure required you could set the diff as a 1.5 way or 2 way etc.

If the diff boys tell me the clutch pack in my diff is acceptable I am going to explore this option further. An added bonus would be the removal of the motors pumps etc that drive the diff.

Fineline & Jarrod,

How did you guys go with your A-LSDs? What did you end up doing?

Mine in my R33 GTR Vspec is open wheeling major. I was thinking of replacing the whole bloody rear diff with a standard GTR one.

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...