Jump to content
SAU Community

Recommended Posts

hi guys im having a bit of an annoying stalling problem with my car. whilst under normal slow driving conditions in back streets or pulling up to intersctions etc the car will stall on me for some reason when i come to a stop. it seems to do it most when i take my foot off the accelerator and brake just as the auto wants to change into the next gear. it never does it if the engine is given a chance to do its own braking ie if i use the gears to help me slow down. even in neutral if i give the engine a free rev to anything over about 2 1/2 grand the car will not come back to idle but will actually stall.

so far i have a front mount, highflow turbo, pod filter, turbo back exhaust, greddy BOV and hard inlet pipe. the only thing i can think of is that my blow off valve is venting to atmosphere but i was having this problem before i put the hard intake pipe on and removed the plum back setup.

i can usually catch the revs before the car stalls but it has made driving the car a pain and the missus freaks out whenever the power steering cuts out around the millions of round abouts in my area. hope one of guys has fixed this problem before and can help me out.

Link to comment
https://www.sau.com.au/forums/topic/234428-stalling-stagea/
Share on other sites

ok cheers mate. i might block it off for a day or so and see if that fixes it first and then i will have to rig up a plum back hose to the hard intake pipe. i was having massive boost issue before i put the hard pipe on so i really want to leave that on there. the stock intake pipe was collapsing under anything more than 12psi.

Link to comment
https://www.sau.com.au/forums/topic/234428-stalling-stagea/#findComment-4107550
Share on other sites

yeah i totally understand what u are saying but i am using a trust airinx filter and the improvement i got when i put the hard pipe on was amazing. also i have a pretty big turbo on my car and it only started collapsing or giving me issues when i put that on and wound up the boost. i will get to putting my BOV back to plum back and see how i go with the stalling issue. any ideas on a remedy if returning it plum back doesnt solve my problem.

Link to comment
https://www.sau.com.au/forums/topic/234428-stalling-stagea/#findComment-4107813
Share on other sites

alternatively cutting the old intake pipe and replacing the middle section with a small length of alloy pipe will give you what you had before and no risk of it sucking shut and this will allow you to replace the factory bov.

nevertheless, if it is sucking shut it implies there is a restriction so perhaps that filter is an issue?

(sorry didn't realise larger turbo, what is it?)

Edited by wolverine
Link to comment
https://www.sau.com.au/forums/topic/234428-stalling-stagea/#findComment-4107837
Share on other sites

i like the idea of the alloy section cut into the original intake pipe. i have highflo GT3076 built by bill at ATS so i cant wait to put the manual box in so i can use my PFC and get the most of the mods i have done so far. should end up being pretty fun to drive being a RWD spec stagea with the suspension i have put in it so far.

Link to comment
https://www.sau.com.au/forums/topic/234428-stalling-stagea/#findComment-4107873
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...