Jump to content
SAU Community

Recommended Posts

Hi guys...

They still seem to work...just noisy as!...Front ones are ok.

Cost me $70 just to have someone tell me that (in Moorabbin), then they wanted over 2.5k for four basic Teins....I don't need 4 and they wouldn't do just the two!.......f**k'em.

I think I could afford a rebuild rather than replacing them. (??)

Your experience and advice, with any potential $$$ amounts would be much appreciated....oh, and locations of good shock techs!

Cheers.

If they lost their oil, then they can't work. What happens when you "bounce" the car?

What do you mean by "noisy"?

For around $1k, you can have 4 Bilsteins (see if SK's group buy is still on).

If they lost their oil, then they can't work. What happens when you "bounce" the car?

What do you mean by "noisy"?

For around $1k, you can have 4 Bilsteins (see if SK's group buy is still on).

Hi B.E.....

I'm only going by what the suspension specialist said.........apparently, there is supposed to be oil, within the casing of the strut.....(?)...this has leaked out.....Creating a clunking noise (almost like a metal rod within a hollow tube sound, when going over anything but the smoothest roads.)...I guess this oil is part of the shockers anti-noise??...maybe even for cooling????

They are HKS HMAX II's....a very odd looking shocker comapared to my other standard cars.

I have set all 4 shocks to their softest setting, btw.(top screw adjustment all the way up.)

My car's rear has never had any bounce or rebound....none from the pressure I can exert anyway...you run over a cigar butt with my car and it launches.....it's probably that that has stuffed my back!...lol.

wow!...are those Bilsteins fully height adjustable,,,(I need this, as I don't want my car any higher or lower, I want it exactly matched in height).

Thankyou for all your responses so far!...

Cheers.

If you can't bounce the car, then it is likely that the springs are far too heavy.

The Bilsteins aren't fully height adjustable, but they have slots that hold a circlip to support the spring base at various heights. I have mine set to the highest setting for a good "low" ride height.

Have a chat with the guys at Quadrant Suspension in Berwick for the Bilsteins, or Barry at Toperformance in Vermont (Koni specialist).

quick question.. howd you get in to adjust the damper settings on the rears? agreed they are ridiculous over rough roads.. car just skips over bumps losing traction!

back seat vertical section comes out....take it from there!...It's done from inside the car. (or that's how I've done it).

Only prob is they get noisier on the softest settings!...I farkin can't win!

I heard there might be a place around Thomastown way....

Still lookin for places.

the clunking sound seems to be the coilovers knocking.

by that do you mean the outer spring touching the shocks themselves?

If so, then no, it's not that......we're pretty darn sure it's just plain foooked shocks.

The springs appear to sit well enough..I had the original springs converted to King Springs...getting rid of that rather odd dual spring thing the HKS originally came out with...some years ago.....the ride did improve a little, noise was acceptable then....I figured it's not a race car..!

Someone suggested Centreline...I'm hoping they can help me out....just haven't had the time even ring em......geeesh, where does the bloody days go....(?)

Anyone have any ideas of what I should budget for, for the reco of the rears?

Thanx again!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...