Jump to content
SAU Community

P Plater Cars.

Deanis.

By Deanis.,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Deanis. Contributor

Deanis.

Posted
Posted

it's been a hell of alot of research, car searching inspections & now i'm truly stumped. being on red p's i can't seem to have anything of decent power but these to pick it up a bit. always been a big fan of both but after checking them out i'm really unsure. wondering what you guys think.

yes i know topics of these cars a plentiful but i haven't found one for these two specific models as of yet.

if anyone has or has had any experience with either or both please help me out. it's been ages in getting it all sorted out & i want to finally buy this thing haha.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/
Share on other sites
Johnny Veteran

Johnny

Posted
Posted

s15's are an amazingly sexy shape stock. r34 gtt's are quite ugly unless they have the nismo kit and look quite anorexic.

sr20 tuned will make some nice power but must rev and those motors are prone to popping rocker arms and scorring camshafts and possibly lodging in the timing chain.

This is from personal experience with my old s15.

the NA r33 i owned was the most reliable thing ever! the rb25 is a torquey motor with bigger capacity and after 20,000kms of thrashing everyday of its life it ran perfectly and never broke down.

Both cars drive fine though; the skyline has lighter steering while the s15 is a little firmer but feels steady.

My verdict is the s15: only 4 cylinders so better fuel economy better stock looks.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4146553
Share on other sites
bozodos Grand Master

bozodos

Posted
Posted

I know someone who has an S15 Autech, the S15 looks fkn hot, and has the exlusivity factor but don't expect it to be anything resembling quick, i'm talking like this thing gets outpaced by a bog stock VN V6.

Hard choice, but I'd personally go the R34.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4148266
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted

thanks for the feedback guys.

i'd be driving fairly normally. sure maybe fang it every now & then a little but pretty much just look seeing as turbos are out of the picture, let alone any performance upgrades. it's almost like they want every p-plate jap car being a ricer. the s15 has the looks, a decnt engine but i wouldn't exactly be trying to race a stock anyway. it's just all class IMO. all they really need are some nice rims, a bit of a drop & a catback.

the 34 would be getting the kit, catback, rims & a drop, led tails, & possibly a wing depending on the one i decide to buy (looking at two atm).

insurance seems to be the thing that really splits it down the middle though. with the s15 at $6k whilst the r34 is $4.7k

as i said i like them both ALOT & they each have pros & cons. just making that final decision without having regrets is the hard part haha.

s15- pros;

smaller engine = less fuel $$$.

looks good as is.

s15- cons;

pretty damn small.

not as much power.

quite high insurance costs.

r34- pros;

bigger.

more powerful.

less on insurance.

r34- cons;

chews worse than s15.

not as good looking stock.

would end up buying visual mods for it then, knowing me that will turn to an additcion.

with the fuel thing i'm aware that neither are very fuel efficient but if i cared about that i'd probably have gotten a small car. stuff that.

also, has anyone had any experience with top secret imports in blacktown?

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4150416
Share on other sites
jakez88 Veteran

jakez88

Posted
Posted

DAMN!!! paying insurance around $4k-$6k sucks ass hard!!! didn't know it was that much!! if i was in ur position that would turn me off on getting a import all together.

if i was in ur position i'd just get something else cause in 2 years of paying for insurance u could by a turbo r32, r33 or even a turbo 34! sucks to be on red p's.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4151790
Share on other sites
vinnie32GTS4 Mentor

vinnie32GTS4

Posted
Posted

Dude go get some different quotes from different insurance places as that is rediculous...Im 18 and im paying $1600 a year for an R32 GTS4 which is turbo and my excess is $900..im with shannons.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4151817
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted

yeah it's opretty rough but what can i say? i've always loved imports. when dad used to take me the the supercars i told him the skylines would be winning if they didn't make that bs rule haha. that ended the dad takes young dean to supercars races era pretty quick =P

you know, when you really like something you'll try to justify even the dumbest prices haha.

what other insurance places will cover an 18yo p-plater? the only place i've tried is just car as it seemed like the only real option. oh & nrma online quote on an r34 series 2 was $11463. i'm not lying or exaggerating either. after that quote i just thought to myself. WTF!? the car was gonna cost me 18990 yet they want well over half of that per year? plus $593 rego? hah!

note i'm actually on L's like 4 houirs left but was banned from dad's car coz of a fight & mum doesn't want me driving hers. too worried about her clutch. i showed her i can do all the stuff fine but hey, it's her baby haha.

yeah i heard shannons is only over 25s & assumed it was mainly classic car style insurance as in you drive it weekends only type of stuff. i'd be using this as a daily.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4153161
Share on other sites
teamtoken Rookie

teamtoken

Posted
Posted

i think your overpaying on your insurance dude, have a look around

as for cars

autech s15 has the same amount of power as the stock s15 we got in aus. which isnt that much to write home about. plus youll pay a premium for them and thats if you can even find one.

dont kno about an NA 34 though

best of luck anyway

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4161156
Share on other sites
NoFX_Hardcore Proficient

NoFX_Hardcore

Posted
Posted (edited)

F*ck that mate. Friend just got a $30000 S2000 insured for alot less than that and he's on his p's.

My advice is to wait til you're off your p's and by then you'll be able to afford a R34 GTR!

Buy a barina.

Edited by NoFX_Hardcore
Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4161279
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted
F*ck that mate. Friend just got a $30000 S2000 insured for alot less than that and he's on his p's.

My advice is to wait til you're off your p's and by then you'll be able to afford a R34 GTR!

Buy a barina.

i'd rather put a fork through my junk than buy a barina =|

i agree with the insurance. found a way around that now though. probably go r34. just for headroom. i'm just over 6ft & there isn't so much space in the silvia. like i think the interior is better. the handling feels more precise but overall room isn't so great. pretty much a 3 seater with me driving haha.

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4162094
Share on other sites
Granthem Mentor

Granthem

Posted
Posted

Yeh R34's benefit interior wise alot by the triple cluster.

Search around on here and you will pick one up for around $150 bucks. Then wire in some of your own gauges (oil pressure, volts, air/fuel etc) and it will spice up the R34 interior for a few humdred bucks.

The NA 34s look stupid because there is a big empty patch in the middle of the dash

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4164503
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted
Yeh R34's benefit interior wise alot by the triple cluster.

Search around on here and you will pick one up for around $150 bucks. Then wire in some of your own gauges (oil pressure, volts, air/fuel etc) and it will spice up the R34 interior for a few humdred bucks.

The NA 34s look stupid because there is a big empty patch in the middle of the dash

amen to that. reckon you could do it DIY or better to get someone else?

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4165315
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted
heres a thought,

go riding round with no insurance if you got the chops for it lol.

considering the number of scum around where i live, don't get me wrong alot are very nice people but probably more are idiots. i don't think that'd be a great idea. especially the old finish work, walk out to the carpark & you're walking home scenario...

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4167700
Share on other sites
Deanis. Contributor

Deanis.

Posted
  • Author
Posted
f**k paying that insurance for something thats no more powerful then a commodore.

I think your silly to buy one with insurance like that. Actually you would be past silly...

not to mention has better brakes, suspension, LOOKS. etc etc. i know what you mean =/

stupid, stupid laws. just set the insurance better. $1153 premium. much better. think all up it's 1k if something happens?

Link to comment
https://www.sau.com.au/forums/topic/236799-p-plater-cars/#findComment-4167732
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...