Jump to content
SAU Community

Recommended Posts

Please check first my specs in my signature.

My car start to work before two days but we have many problems!!

It works VERY VERY VERY LEAN!! Lean idle (20afr), lean revs on the neutral (17afr) and lean in easy driving (15-20afr).

Very very crap. It revs very very bad. Only at high revs (more than 4000) seems to work better. Ofcourse I don't try to run it in the road with boost but I did a burnout and at high revs looking very coool!! :(

I am not sure what exactly map has the ecu but before I bring here a tuner I want to be sure that I don't have any other problem.

It is a stock r32 ecu and I bought from gtr.co.uk member that he had 1000cc injectors z32 mafs and was twin turbo. He said that his car worked great but he bought the ecu second hand and the ecu writes that it was tunned with 660cc but his car worked good.

I don't want to run the car in boost but it cannot run good neither in vacuum.

It is the map sure? Or I must see for something other?

With avc-r show me at idle that the injectors are open only 1.6% but I am not sure if the avc-r shows right.

Do you have ideas?

Something with mafs?

Something I can check?

I repeat tha I want just to be sure that I don't have any other problem and I need just a tuner.

I am waiting your help please.

Thanks!!!

2.5-3 bar.

We test with several fuel pressures... till and 7 bar!!!

With 7 bar was a little better lol

Any other idea?

Another idea... Get it tuned?

You have VERY lean fuel mixtures. You need to get the car tuned, for your motor, and injectors... Tune it. Now.

I will tune the car.... but I want to be sure that I don't have any other problem. The tuner is in an other city and I must send the car there.

So if I have any problem there will be very difficult for me.

Also it very strange to be the car SO SO LEAAAN!!

Lean idle? Lean at 2000-3000rpm driving?

The car feels like you don't have fuel in the tank and it is ready to run out of juice.

I connect the knock sensors but nothing different...

We have an update...

My tuner send me a map that the car must work he said me.

I put it on and yet it works... but for some minutes only..

So I had 14,7 idle and the car worked ok.. at high revs 10-11afr! Great!!

BUT ALL THEESE ONLY FOR SOME MINUTES.

I don't know why but after some minutes goes again to the yesterday LEAN!! So lean as the previous map!! VERY LEAN!!

Why????? So the problem isn't the map... something other is the problem guys!!!!!

I put off the plugs of mafs and car worked good haha! 10.5 afr idle but it works ok in the safe mode untill 3000rpm. No lean...! And correct idle vacuum!

Problem with mafs?? But what problem? With ignition on but engine off the voltage is 0.48V on both mafs! Is this ok?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...