Jump to content
SAU Community

Recommended Posts

check out vivagarage, they have well priced fenders, pretty sure their for the gt-t anyway.

vivagarage widebody will require GTR side skirts & rear bar.

the only company i found that was able to use GTT rear bar & skirts was blits bodykits in QLD.

where does the jetspeed one come from and any idea on price? and a link mayb? looks good as i recon, cheers

http://jetspeed.com.au/product-list.asp?pa...d=6&navid=6

you will have to ask them for a price as i do not know yet sent them a message bout 3 weeks ago and still no reply :) , let us know if they reply to you

cheers jarrod

$1200 bucks for just the front bar kinda sucks... especially since ud still need to get it sprayed i asume. and ud need a new bonnet to i think not sure.. looks awesome but i recon. im not that big on the rear bar but. thanx for the link jarred and if i try get 1 and get a reply about anything il let ya no mate

$1200 bucks for just the front bar kinda sucks... especially since ud still need to get it sprayed i asume. and ud need a new bonnet to i think not sure.. looks awesome but i recon. im not that big on the rear bar but. thanx for the link jarred and if i try get 1 and get a reply about anything il let ya no mate

cheers mate :P

Who sells a GTR-looking front bar for R34 GT/GTT's these days? - considering JSAI is non-existant anymore.

I've decdied on the Impul Sides and Rear, not too sure on the front.

I considered the Altia option front bar, but does anyone know where you could get the lip for it? If custom fabricated, what sorta $$ we looking at?

17830355.jpg

Without the lip, would the side skirts sit lower than this front bar? Or would the front bar look too short (would like some clearance, but in proportion to Impul sides)?

Any advice is greatly appreciated :bunny:

Who sells a GTR-looking front bar for R34 GT/GTT's these days? - considering JSAI is non-existant anymore.

I've decdied on the Impul Sides and Rear, not too sure on the front.

I considered the Altia option front bar, but does anyone know where you could get the lip for it? If custom fabricated, what sorta $ we looking at?

17830355.jpg

Without the lip, would the side skirts sit lower than this front bar? Or would the front bar look too short (would like some clearance, but in proportion to Impul sides)?

Any advice is greatly appreciated :huh:

Hi, if your looking for a GTR style bar, read this http://www.skylinesaustralia.com/forums/in...t&p=4629518

Hope that helps u abit

Hi, if your looking for a GTR style bar, read this http://www.skylinesaustralia.com/forums/in...t&p=4629518

Hope that helps u abit

cheers :huh:

not sure how I forgot about that one - I was having a good look at those pics just the other day! If I'm game to cut up the bar like you have I'll most likely be doing that :D .

How much lower than the stock front bar does it sit?

cheers :huh:

not sure how I forgot about that one - I was having a good look at those pics just the other day! If I'm game to cut up the bar like you have I'll most likely be doing that :D .

How much lower than the stock front bar does it sit?

I say it would sit lower by approx 7-10cm lower than the stock bumper, quite a pain when entering places or parking

i like what you've done 'Aznbongsta' looks nice

i'll add JSAI's ztune front bar to the list =/ even though Josh seem not to exist anymore

changing my sides to Impuls soon like Peter :P

future change to the front bar would be to cut out that grille thing and insert a mesh

post-47244-1246598474_thumb.jpg

post-47244-1246598621_thumb.jpg

Edited by lankanboiiR34
I considered the Altia option front bar, but does anyone know where you could get the lip for it? If custom fabricated, what sorta $$ we looking at?

17830355.jpg

i have this front bar, i really like the lip underneath it, does anyone know where to get it from, how much?

i have this front bar, i really like the lip underneath it, does anyone know where to get it from, how much?

You can grab it from Nengun I believe. It's the east bear lip for factory optioned front bar.

+1 to impul side skirts, best ones on the market for R34 GT/T :)

shehan; where are you going to get yours from ?

umm peter also asked me this Q, the only place around are area is carmate right?? LOL ill probably buy it from there and paint/fit it at Xtreme Bodykits in Warwick Farm. You know of any other places??

Also was looking through PowerPlayImports site with their Eastbear conversion kit.. they had nice looking side skirts and rear bar hehe might be anothe option, no idea about cost though

i like what you've done 'Aznbongsta' looks nice

i'll add JSAI's ztune front bar to the list =/ even though Josh seem not to exist anymore

changing my sides to Impuls soon like Peter :)

future change to the front bar would be to cut out that grille thing and insert a mesh

post-47244-1246598474_thumb.jpg

post-47244-1246598621_thumb.jpg

so is there any other way of getting a z-tune style front bar?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...