Jump to content
SAU Community

Recommended Posts

In regard to the more fuel argument, even if you do get more fuel in there, the cylinder's the same size so the exhaust gases would be the same volume (unless more volume of air was in there) or would it be less because you know have more fuel and less air?

I never was that good at understanding engines :blink:

If you put more of anything in the front, you get more out the back.

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

Of course, I've no idea what I'm talking about.

Furthermore, I guess there's no going back to 98pulp after you build a high comp engine. And on the track, most engines are on boost rather than off. So it's prolly not viable.

But is it possible?

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

Of course, I've no idea what I'm talking about.

Furthermore, I guess there's no going back to 98pulp after you build a high comp engine. And on the track, most engines are on boost rather than off. So it's prolly not viable.

But is it possible?

Very possible - we intend on running more compression with the F6 we are building atm, aiming for around 850rwhp on E85.

Very possible - we intend on running more compression with the F6 we are building atm, aiming for around 850rwhp on E85.

i think its more of a reality then a posibility, just look at the compression ratio alcohol / methanol cars run.. over 11:1

So, Can you run higher compression on E85? Would it yield more results?

Hypothetically, Say you were building and engine and you plan to run it on E85, a stabler fuel should allow for more compression, yielding more power. Especially down low, and off boost.

yep for sure.. the higher effective octane rating of E85 means you can squander that advantage either

with higher boost at the top end, or much higher compression to gain more torque everywhere although

at higher compression I guess this would diminish the ultimate boost limit at the top.. where the headline

power figure is made.

Now what you really want is a variable compression ratio engine! that would be the best, especially

if you combine with variable cam timing.

compare the flexibility of a hawk's wing to the relatively fixed wing of a plane! smart variability should be the ultimate

goal of every machine..

i think its more of a reality then a posibility, just look at the compression ratio alcohol / methanol cars run.. over 11:1

Is that N/A or boosted tough.

E85 would be awesome if you were turbocharging a normally N/A car. No need to reduce compression.

ok so i have a rb25+t turbo conversion, with higher comp ratio,

what would i have to do to run this fuel, apart from a tune, bigger injectors?

the car already has the usual mods, bosch 023 pump, Fmic, full exhaust, and getting a remap soon,

thanks, sorry if it has been covered, but 20 pages is a lot of reading lol

put on decat today and run it up again

I cant believe the results mate, amazing!!!

340rwkw out of a .68 housing. Thats GT35R territory.

Cant wait to get mine on the road and tuned on this stuff.

I cant believe the results mate, amazing!!!

340rwkw out of a .68 housing. Thats GT35R territory.

Cant wait to get mine on the road and tuned on this stuff.

Yeah still blows me away....You wont be dissapointed thats for sure

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

Anthony,

There are two Enhance service stations that sell e85 that are about 15 mins from WSID: Coner of Rawson and Ferndell, South Granville, and Hume Highway, Carramar (south side, just west of Meccano lights).

Anthony,

There are two Enhance service stations that sell e85 that are about 15 mins from WSID: Coner of Rawson and Ferndell, South Granville, and Hume Highway, Carramar (south side, just west of Meccano lights).

thanks charlie..

was good meeting you yesterday, thanks for saying hello!

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

I am if i can get my engine run in properly before hand.

I have 2x 20L drums that will be filled with E85 that i will be taking just incase.

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

im keen...need to add a 2nd set of injectors though...and maybe another fuel pump.

who's up for running E85 for power cruise ? where is the nearest outlet? I was thinkin bout pushing my beast to 400rwkw for power cruise and with standard rb25 cams im going to need to be running e85...

/nods

okay.. im going to do the switch back to e85 on the second week of feb.. i went to the united servo in newcastle and asked them about e85, the guy had no idea what i was on about and gave me the nsw area managers number.

Im going to be ringing him up and hassling him :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...