Jump to content
SAU Community

Recommended Posts

sweet... do you have enough balls in the rest of your fuel sys to handle 400 on e85?

would be nice to see you crack it if you ever decide to upgrade injectors.... i mean there's gotta be someone you could swap with for a small cash advancement....

i have stock cams so i am at the max power my head can flow at the moment, changing the fuel will not make a difference untill i get cams and valve springs.

I aint interested in upgrading the injectors, the nismo's drive great and there is no need to upgrade them. this is a every day car and i am not going to go to big un controlable injectors just for the sake of chasing silly high dyno numbers.

I just want a 10 second quarter and i can achieve that on pump 98, i will go back to e85 once i get that over and done with and put the smaller streetable turbo on.

Got a call from my mate this weekend. He's been running E85 in his 180SX and intended to go for a drive back to the Riverland (SA) for the weekend. Went to get E85 from EFFUE at Mawson Lakes only to be told that they had none! If this keeps happening then E85 is not going to be a realistic option in SA. Very annoying.

Fortunately we still had the tune we did for 98 (he's running Z32 AFM + 740's) so I set him up with a multiple map board and now he can switch between the two. Not quite "flex-fuel" but at least it'll get him out of a bind. Gotta make sure he empties one fuel type before filling with the other that's all...

PL

Hi mate

scotchers race fuels in SA has a 98 blend at the pump $1.70 p/l

Hi mate

scotchers race fuels in SA has a 98 blend at the pump $1.70 p/l

Good to know. Looks like a few places that traditionally do race fuels are starting to supply their own E85/98 blends. $1.70 is still a lot more than the mainstream places - but at least you know what you're getting. And it's at the pump - no drums! :D

PL

how does E85 go with storage? the melb place is a bit of a drive for me but if the fuel stores ok, i'll probably fill up a fair bit and keep the rest in my garage.

I probably do about 100km's per week anyway, so i don't drive a lot.

i guess my question, is how long will it last stored? does it go.... "off"?

If you keep E85 in metal drums that are air tight and in a cool dry place, it will last for a couple of years.

Its only when water/moisture gets into it that the shelf life drastically reduces.

Quick update for SA guys. A mate went down to the ENFFUE servo at Mawson Lakes last night and they had E85 for $1.20 per litre. The guy working there said that they had a new supplier and the future looked promising. Make of that what you will.

PL

If you keep E85 in metal drums that are air tight and in a cool dry place, it will last for a couple of years.

Its only when water/moisture gets into it that the shelf life drastically reduces.

but at the petrol station i'd take your only option is jerry cans, and from there... do you put it in a metal drum at home?

these hard to find/expensive?

or would a good quality jerry can be ok for a few months?

what afr is it running? my 25 still runs side feed 850cc sard's and are maxed at 380 rwkw on willalls mainline, im pretty sure by the way the map suddenly maxes (crazy rich then snaps lean) out it's a flow issue not the injectors

380rwkw on willall's dyno will be like 400+rwkw or 500+rwhp

that will be a wild ride :cheers:

My af ratio is around high 11 to 12:1 with fuel pressure of around 55psi at idle. Tuner was fairly conservative.

I love how clean the E85 comes out of the exhaust.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...