Jump to content
SAU Community

Rear Axle Click

GEXer

By GEXer,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

NISMO Grand Master

NISMO

Posted
Posted

Most mechanics should be able to do it.

Best bet is to jump on a 350z or G35 site or look up Nissan USA TSB's for the 350z or G35 and you should be able to pull up a complete workshop process including all the parts needed.

From there most ha;f idea mechanics should be able to do it. Or there's always your local Nissan place, just don't expect them to know what a TSB is :-)

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4192358
Share on other sites
GEXer Enthusiast

GEXer

Posted
  • Author
Posted (edited)

cheers guys, would prefer someone who knows and have done this before, rather than they fiddle around with my car trying to figure out wat to do...

thanks bobby for the link, looks like the bearing n axle joint need to be replaced, i thought a simple lubrication on the joint would get rid of the sound.

Edited by GEXer
Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4193362
Share on other sites
NISMO Grand Master

NISMO

Posted
Posted
cheers guys, would prefer someone who knows and have done this before, rather than they fiddle around with my car trying to figure out wat to do...

thanks bobby for the link, looks like the bearing n axle joint need to be replaced, i thought a simple lubrication on the joint would get rid of the sound.

No worries, It's funny though that you simply replace the same parts. I'd be a bit worried about it doing the same thing again. Unless they're now using different bearings or something.

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4193378
Share on other sites
  • 1 month later...
  • 5 months later...
180 wanabe Proficient

180 wanabe

Posted
Posted

Hey guys just noticed a click coming from the back of the car when I take off from standstill quickly and if I then back off the gas suddenly if the car is under load. Only just noticed it because I normaly have my windows up and the air con on + the nismo cat back make its hard to hear things going on outside

dosent sound too bad, If i leave this for a while is anything bad going to happen?

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4604071
Share on other sites
ogz007 Rising Star

ogz007

Posted
Posted
Take the TSB down to joshua @ Pro Concept Racing in West Ryde or to Power Play Imports @ Drummoyne

only 2 places i would trust with my car!

+1 to Josh @ Pro Concept - good bloke & knows his proffesion. My car gets milked by josh's 10 fingers.. and i say he does a top job.

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4604111
Share on other sites
T88turbo Collaborator

T88turbo

Posted
Posted

Relax people i investigated this noise a long time ago however i haven't performed the procedure on my car yet, next service.

Replacement of parts is not necessary other that the bolts and washers. Give this to your mechanic to prevent him from stuffing around. All that needs to be done is have the axle retorqued and greased where shown on the diagram.

axle_clicking_noise.pdf

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4605410
Share on other sites
T88turbo Collaborator

T88turbo

Posted
Posted

I have one other question to ask which has nothing to do with the topic however i think it is important that everyone knows.

There is a common problem with our cars in relation to the rocker cover (other name for this is valve seat). My mechanic performed a replacement of the spark plugs and at the bottom of the tube there was evidence of oil. It was on the second bank (when you face the bonnet on the right hand side. The spark plug closest to the firewall had the leak. Has anyone noticed this yet?

Apparently the rocker cover has to be replaced, but the good thing is it is something that doesn't have to be done asap as you do not lose tonnes of oil only a very little bit. Personally im going to wait till it gets worse and have my mechanic monitor it on every service.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4605442
Share on other sites
V35_Paul Veteran

V35_Paul

Posted
Posted
I have one other question to ask which has nothing to do with the topic however i think it is important that everyone knows.

There is a common problem with our cars in relation to the rocker cover (other name for this is valve seat). My mechanic performed a replacement of the spark plugs and at the bottom of the tube there was evidence of oil. It was on the second bank (when you face the bonnet on the right hand side. The spark plug closest to the firewall had the leak. Has anyone noticed this yet?

Apparently the rocker cover has to be replaced, but the good thing is it is something that doesn't have to be done asap as you do not lose tonnes of oil only a very little bit. Personally im going to wait till it gets worse and have my mechanic monitor it on every service.

Cheers

Yeah someone posted something about this before, "oily spark plugs" can't remember where i read it.

Link to comment
https://www.sau.com.au/forums/topic/239992-rear-axle-click/#findComment-4606620
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      S1 rb25/s14 starting problem

      By Dose Pipe Sutututu · Posted

      When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...