Jump to content
SAU Community

20" Te37 Rims

CR34M

By CR34M,
in General Automotive Discussion

 Share

Recommended Posts

CR34M Community Regular

CR34M

Posted
Posted

Hey i was wondering round the 'Rays Engineering' web-page and was curious as to how much a set of 4 limited 20" TE37's are.

The price is on the website:

http://www.rayswheels.co.jp/indexe.html

It says 160 000 Yen, which is roughly about $2300.

My question is, if it is $2300, is that for one 20" TE37 or a set of 2....or 4 (I doubt 4)

But im guessing its unfortunately for just one rim... :bunny:

Link to comment
https://www.sau.com.au/forums/topic/240101-20-te37-rims/
Share on other sites
Gazzilla Experienced

Gazzilla

Posted
Posted
$2300 is for one wheel :)

You'd be lucky to get a set of 18's landed here for that price at the moment.

But 20s on a 34... wont happen unless you like the 'tractor' look

20's look great on my 34, but maybe coz their deep dished..

Link to comment
https://www.sau.com.au/forums/topic/240101-20-te37-rims/#findComment-4195348
Share on other sites
CR34M Community Regular

CR34M

Posted
  • Author
Posted
i lol'd

Well if you have ever heard of Autosalon, then you'd understand what the wheels would be for :laugh:

Also i wasnt planning on driving on them like most people said and for 2300 bucks i wouldnt plan on buying them either, i just wanted to know if it was for one rim or not.

I was looking at 19" LMGT4's and the 20" TE37's caught my eye, for show use when i put my wide body n try entering it next year etc.

As for yur loling tell CGHOST R33 and the GHOST Skylines cars that are at Autosalon why they have 20"s on their cars or why anyone at any show changes their rims :P Too many people jump to conclusions here without actually helping out or contributing.

I have some decent/affordable 18x9's on my R34 coupled with 235 front and 265 rear Kuhmo ECSTA SPT's and they do the job damn well.

Link to comment
https://www.sau.com.au/forums/topic/240101-20-te37-rims/#findComment-4197073
Share on other sites
CR34M Community Regular

CR34M

Posted
  • Author
Posted
autosalon hey?

fair enough then.. maybe go for 22's..

also, do you prefer the company of men over women?

I prefer my fiance in the terms of sexual preference thanks, as for prefering the actual company i keep, that would be my mates which mostly happen to be guys...so yeh i technically do prefer the "company" of men over women.

And ill take it the 22" was prior exp and that you just checking out to see if i was worthy of some male bonding with you. :P

Plus whats the big deal with 20" rims...i wouldnt put em on when i was driving anyhow, but everyone has their own tastes etc. For example, personally i don't like massive chrome rims, its just personal preference. The way i see it 20" TE's visually will look better standing still at show rather then 18x9"s or 17x8's which are practical for driving and looks in general. The extra diameter on the 20"s give it a 'engineering appeal' when fitted correctly and they sit flush with the guards of the car they set it apart from others

Then again most people don't see things as aesthetically as i am with my OWN car :S People set the canvas for their cars how they see fit, to some it may not appeal, to others it might be an innovation they wouldn't have thought would look good until it had been done.

Thanks to the people that could help me on the matter anyhow.

Link to comment
https://www.sau.com.au/forums/topic/240101-20-te37-rims/#findComment-4198316
Share on other sites
TTT Grand Master

TTT

Posted
Posted

It's your choice mate..

We are just passing our opinions here.

People are different. you see an R34 with 20 inch wheels that can't be used as a work of art that everyone wants to look at.

I think it's the most stupid idea in the history of the universe..

we're just different.

Link to comment
https://www.sau.com.au/forums/topic/240101-20-te37-rims/#findComment-4198759
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...