Jump to content
SAU Community

Recommended Posts

  • 5 weeks later...

breather pipe can be tough to get off, it can take a lot of force and wriggling to get it loose, keep track of all of the screws, there will be a few, i spose there isn't really a lot to it, there is a tutorial around here, im going to do mine either 2mro or during the week

will post pics if you like when i get around to doing them

Edited by RusH_
Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4263191
Share on other sites

Its a pain in the ass !!!! I did ours on Friday had to dismantle the intake and all the pipes etc in the top of the motor. Thats the most time consuming part after that its quite easy. It was a little different to the tutorial as ours is a NEO engine but it is much the same.

As has been said keep track of your screws as there will be a few and take your time.

Good luck with it

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4263403
Share on other sites

It depends on your power output. If you have a sub 200rwkw car then iridiums are good, but if you have a 200+ rwkw 'line then your better off with coppers. The iridiums have a long and trouble free life but don't provide the fattest brightest spark, so if you have knock issues with a bigger turbo etc then coppers are probably a better option. Not saying it will solve your problem, but its more likely to help than iridiums can.

Basically, iridiums are not a performance plug, they are more a maintenance free plug.

And before anyone queries, 200rwkw is just the start, I actually had no problems with my iridiums till I went from 240 to 280rwkw [different turbo install] and had to make the change to coppers.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4264885
Share on other sites

It's best after ALL THAT WORK to use the high quality NGK Grade 8 Iridiums for your car (or equivalent)

+1

make sure you gap them right, dont drop em either haha

+1

Hmm.. didn't know that copper ones could solve knock issues.... have to look into that. I assume they're cheaper, as well.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4269679
Share on other sites

try around $3 a plug not $20. I use coppers from the recommendations made in various threads in here not to mention CRD used a set of em when they tuned my car. I use NGK BCPR6ES gapped to .8mm but I'm going to the BKR7ES gapped to .8 as well on the next service.

My VN with a small cam, chip and exhaust has been using the same set of Iridiums for 80 000km and they are still fine, so for a near stock application they could well be perfect - the amount i've saved there not having to buy sets of 8 copper plugs more than makes up the high inital cost.

Link to comment
https://www.sau.com.au/forums/topic/240450-spark-plugs/#findComment-4270222
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...