Jump to content
SAU Community

Recommended Posts

hey guys just wondering if anyone can tell me some good shortshifter kits for r32 gtst. my laast r32 had a really shitty one or badly installed one so i'm not sure if most of the mare like that. My last r32's short shifter had heat coming up it which was freakin annoying especially in summer as it would make the car a sauna.

now just wanting to know if my kit had a crappy install or do some shortshifters do that. which ones do? which ones don't.

the only thing i liked about my last one was that it wasn't as tight/short a throw as some on the market have. my friends one is realy tight that i rekon it on moves 1-2cms from neutral to 1st. it was uncomfortable and didn't even know which gear i was in some times as the stick didn't seem like it moved at all.

any suggestions on good shortshifters with a good throw and not stupidly short/tight one. also ones that do not let hot air come up, where to get, and prices.

thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/240557-good-r32-gtst-short-shifters/
Share on other sites

yeah c's or nismo, c's has shorter throw but i went for nismo, looks like a stock item, and you know its going to work well,

from memory nismo is $220 (maybe bit more with shit exchange rate) you can choose between 10% reduce throw and 25%

C's is about $300-$350 (reduces throw 30%) from memory,

i wouldnt go any other brand then these 2.

JV

ive got a short shift in mine. is kinda cool but is really tight n can make getting into gear a bit annoying sometimes.

and also sometimes cant tell if im in 3rd or 5th...so i put it into 4th to check n turns out i was in 5th so revs go up n yeh...

but i love it...my choice... c's

  • 2 weeks later...

Vinnie = a GTR gearstick connot be swapped into a GTS-T. You have a GTS-4. exactly the same driveline as a GTR so it fit.

Jakez88. I bought a C's short shifter for $250 brand new delivered from a trader on this forum (can't remember which one). I'm a mechanic and I rate this as a great buy for someone that really enjoys driving their car (not just being seen in it). It has the rubber insulation between the top and bottom shafts so there is no heat or noise/vibration transfer to the cabin. It gives a much more positive gear engagement and shift compared to the standard gearstick. And the old wives tale of short shifters destroying gearboxes is like a gun, It doesn't kill someone, It's the person weilding it. In short, It won't give you a performance upgrade at all but it is a fantastic driving experience upgrade. I've actually forgotten I have one until I drive someone elses and remember how nice my car is to drive.

I put one in mine (i think the same as one as this) http://www.skylinesaustralia.com/forums/Fi...ter-t21079.html. i liked it but the oil runs out going up hills. we didnt put a cover over the hole, then we tried to fit a small one but it just popped out when i changed gear. cant see how to fit the cover from the standard stick when the mount has only a small edge and it wouldnt stay on it. its fine on the flat but going up steep hills isnt. iv put the original stick back in for now till we modify the mount.

Edited by johnGTS-t
I put one in mine (i think the same as one as this) http://www.skylinesaustralia.com/forums/Fi...ter-t21079.html. i liked it but the oil runs out going up hills. we didnt put a cover over the hole, then we tried to fit a small one but it just popped out when i changed gear. cant see how to fit the cover from the standard stick when the mount has only a small edge and it wouldnt stay on it. its fine on the flat but going up steep hills isnt. iv put the original stick back in for now till we modify the mount.

I used a couple of the circlips that were holding the old shifter in to space the block up. The 32gtst box has a shorter snout than the 33gtst box and as such that block doesn't clamp on properly.. you may find you have a 33gtst shifter..

When I put my shifter onto the 25 box it all fitted fine.

Normal price for a C's one on Sliding performance is 310 i think, go on ebay, i paid 80 for mine.

As far as i can tell its exactly the same in quality and the parts that come with it so good deal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...