Jump to content
SAU Community

Recommended Posts

Thanks for the photos, Satanic.

I was trying to figure how it would fit under the boot hinges.

I guess its quite different from the R33, where that had a bracket that sticks out as well.

From the photos, you had to cut the lining right? Just a small slit?

Yeah, the rear strut doesnt do much.

My R33 felt the same when I installed one.

Mainly for looks. :ninja:

Damn, why cant Nissan make more parts compatible between the R33 and R34 :down:

i hear that it makes little to no difference...front strut and sways will be all u need...after coilovers or a spring/shock combo of course...

Can confirm that.

The front strut made a massive difference... best bang for buck in regards to handling mods for sure! 2nd hand cusco front strut braces are 100-150 depending on condition. Piece of cake to install as well.. Not sure why these didnt come stock ?

Does the strut make much of a difference? Keen to put one in mine when I can.

Made heaps of difference on mine, tightened up the rear end a lot.

i hear that it makes little to no difference...front strut and sways will be all u need...after coilovers or a spring/shock combo of course...

You're hearing wrong... and no, those parts are not ALL you need... furthermore, R34s came standard with a front strut brace that more than does the job, why the hell would you replace it? So tell me why you'd NEED to do that?

Thanks for the photos, Satanic.

I was trying to figure how it would fit under the boot hinges.

I guess its quite different from the R33, where that had a bracket that sticks out as well.

From the photos, you had to cut the lining right? Just a small slit?

Yeah quick n easy install... those photos are almost 2 years old now. Some dude who did it in Japan had to grind away the edges on the brackets as he was fitting it to a 4 door. As for the trimming, you are spot on, just a small cut here n there so the brackets fit through.

Can confirm that.

The front strut made a massive difference... best bang for buck in regards to handling mods for sure! 2nd hand cusco front strut braces are 100-150 depending on condition. Piece of cake to install as well.. Not sure why these didnt come stock ?

Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

Obviously not.

You can clearly see my avatar has an r33 in it.

and under that it says my car is a r33.

so now you can see how its a bang for buck handling product.

If your car has a subframe that all the rear suspension arms bolt onto, the rear strut brace does nothing as the subframe provides excellent rigidity. If the upper arms bolt onto the body (like in the front) then it would be worthwhile.

Remove rear trims... all will be revealed. On each side there are 2 threaded rods poking out, this is where the Cusco brackets bolt to. It's almost as if Nissan was going to put that exact item there, but ran out of money or something.

Made heaps of difference on mine, tightened up the rear end a lot.

You're hearing wrong... and no, those parts are not ALL you need... furthermore, R34s came standard with a front strut brace that more than does the job, why the hell would you replace it? So tell me why you'd NEED to do that?

Yeah quick n easy install... those photos are almost 2 years old now. Some dude who did it in Japan had to grind away the edges on the brackets as he was fitting it to a 4 door. As for the trimming, you are spot on, just a small cut here n there so the brackets fit through.

Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

Umm...relax? I read/heard from SydneyKid's threads...so go tell him he's wrong. I'm just passing on what I heard/read. I didn't say R34's didn't come with one standard...nor did i say it needed to be replaced...I was simply saying that thats probably all he would need for a decent setup...

  • 8 months later...

a bit of an old dig up on a thread (although i thought better reviving one then making a duplicate).

my question is where can i get one of these rear strut braces...i know cusco make them but cant find one...

cheers in advance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...