R34 Gt/gt-t To Gtr Guage Cluster Conversion

[Project-GT4-TT]

Just fished some instructions on how to swap your guage cluster for a gtr one.

I havent done this yet so i cant confirm it works when i have finished it i will post pics but that might not be for a while because i want to take the dash out when i do it to run the wires for my MFD aswell but cant afford to be without my car for now.

I worked it out using the service manuals.

It involves pulling every wire pin out of its connector and rearanging them, also making some wires shorter and some longer.

I wrote the instructions refering to my R34 GT-4 which does not have HICAS which is why the HICAS ROW is coloured blue.

The connector pin numbers are in the doccument, an example of what to do is (Drivers door switch signal) PIN # 2, move to PIN # 52, on the third connector, therefore the wire will have to be made longer.

IMPORTANT: I wrote the columb on wether the wires have to be made longer or shorter based on the fact that i guessed that the wires would come from the left, i havent pulled my guages out yet so therefore do not know if this is right... obviously if the wires come from the right just do the opposite.

I would suggest labling every wire before you start removing them because you dont want to stuff something up.

Im going to buy a DYMO lable maker and put the move to # on every one the pull them all out then put them back where there meant to be. Just a suggestion.

Can someone please tell me why i cant upload EXCEL doccuments, should i be able to, and then i will post the instructions up.

[Project-GT4-TT]

Woops, i meant to put this in the DIY forum