Jump to content
SAU Community

Recommended Posts

hey my car has the following done for handleing:=

Suspension:

Bilstein Shocks

Eibach Springs

whiteline Front and rear strut braces

Whiteline front and rear adjustable sway bars

Uras adjustable castor rods

rolling on 18x8" XHP wheels

Fronts 225/40/18

Rears 235/40/18

the reason why it handles poorley is because i had a bmw e30 with just a set of springs that handled better

do i need to fine tune it all???

Link to comment
https://www.sau.com.au/forums/topic/241811-why-does-my-car-handle-like-sht/
Share on other sites

how does it handle?...

too much body roll?

no grip?

understeer?

oversteer?

poor steering feel? etc.

the e30 handles quite nicely from the factory, i almost bought one a few years back, (i presume ur talking about an e30 with an rb20 in the front),

so you may have just set the car up too stiff, but its hard to know whats wrong without you going into more detail about how the car currently handles.

how does it handle?...

too much body roll?

no grip?

understeer?

oversteer?

poor steering feel? etc.

the e30 handles quite nicely from the factory, i almost bought one a few years back, (i presume ur talking about an e30 with an rb20 in the front),

so you may have just set the car up too stiff, but its hard to know whats wrong without you going into more detail about how the car currently handles.

oops i meant my new r33 sorry guys for the confussion

i felt the bmw handled better just off a set of springs

shorter wheel base and weight makes your beamer more of a go cart to drive. 33's are abit of a whale but it seems like you have most of the gear to fine tune it. as teh post before what exactly are you experiencing that your not happy with.

I guess you just have to adjust to its handling characteristics abit.

i suggest a set of coilovers wich aint to bad in price these days...

and adjustable chamber arms for front and rear

that way u can weel align it to handle how ya want...

oh and remove the hicas so u dont get that taking over at higher speeds

i suggest a set of coilovers wich aint to bad in price these days...

and adjustable chamber arms for front and rear

that way u can weel align it to handle how ya want...

oh and remove the hicas so u dont get that taking over at higher speeds

do they come with a hicas bar standard??? and what happens @ high speeds when its on???

practically i want a bit of a drift car but is that possible if you want it to handle to???

well they have got hicas standard.. it it assist steering in moving the rear wheels wich can be a problem esspecially if u want a drift car..

so u have to get a hicas lock out bar. there only about 100 dollars and easy to install. if u get those mods and take it to someone

that knows how to set a wheel align up for a drift car u will have no probs with handling...

well they have got hicas standard.. it it assist steering in moving the rear wheels wich can be a problem esspecially if u want a drift car..

so u have to get a hicas lock out bar. there only about 100 dollars and easy to install. if u get those mods and take it to someone

that knows how to set a wheel align up for a drift car u will have no probs with handling...

ok so basically i just need to get one of these bars to lock the wheels into place will this make it handle any better???

or is it just sweet for drifting???

No, removing the hicas will not make your car go from handling crap to great. I doubt you would even notice the difference. Hicas adjusts small amounts of toe in the rear of your car when travelling over 80kms(ish). I'm not suggesting it's a bad thing to remove your hicas but don't believe all the hype people make about how incredible you will drift after it's gone. It's simple... you won't.

Your car already has "coilovers" since that's what R33's comes with from factory and it sounds like you have a decent set in there already so don't be in a rush to take them out. Do some searching on the forums and you will find vast amounts of info to help you get the car better set-up. All I can suggest is to take it one step at a time so you know what is improving your car and what isn't.

Simple but effective: get a nice set of coilover suspenion (don't go cheap) and lower it down a bit... get good tyres (don't go cheap)... get a wheel balance/allignment... then drive it... you will notice the difference...

hmmm.... well u decide weather the hicas affects ur driving... i have never felt it in mine and i dont have the lockout bar. but for a 100bucks it aint much... obviously your car has coilover set up suspenion but they aint ajustable and will never preform as good as say tien or hks adjustable suspenion, if ya do the mods i suggested u should have no trouble..

Having suspension parts is all well and good but they are just like good stereo equipment.... if they are not set up right it is going to waist...are the shocks adjustable? and the castor arms... if they aren't right they do more harm than good in my opinon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Try looking at Eibacb/H&R springs Thats what Gary sourced for mine.
    • Hey y'all! I'm curious about how y'all go about widebodying your cars. I noticed that when running a square setup, my front wheels are a bit more tucked in than my rear wheels. Not by much, maybe 5-10mm. This leads me to wonder - when I widebody, should I use narrower front flares and wider rear flares? I found a set of 40mm rear flares that I really like, and was thinking of pairing them with some 18mm front flares, but I don't want the car to look strange. How have others done this? Note, I'm in a sedan. Thanks!
    • And if it was anything other than an auto tranny part, it might be a problem. But seeing as all auto trannies belong in the recycling bin, it's fine.
    • I have an R32 Fenix rad. It is good.
    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
×
×
  • Create New...