Jump to content
SAU Community

Recommended Posts

It's really wierd. At night when it's warmish the car runs fine. But in the morning when the air is cold it gets up to about 5psi and the boost keeps rising but the car feels like it is running retarded. It doesn't missfire or anything like that it just feel like it has lost a huge amoutn of power. But it only happens when you try and rev it a bit. Crusing is fine. Any idea's?

my car had same problems - mechanic said these are the causes

fuel pump

spark plugs

injectors

fuel filter

one of them is dirty.. hope that helps!

i changed my injectors since i was upgrading anyway.. and it worked perfect

Edited by Tomei_32

Yea stock ECU running a haltech intercepter.

I might have to do some reading on R&R.

But ran the car again tonight and didn't miss a beat.....

So its just the cold air thats causing problems

Well i took it for a drive last night and it played up again. at about 6psi it would feel like the car is retarding and then the boost would spike up.... but this also happens with the boost controller off too so i dont think that the problem. I stoped it and let it sit for about 30 minutes. Straight away it didn't miss a beat for the rest of the night....

Ok this is becoming anoying, it seams that if i leave the car sit overnight or through most of the day it will run shocking as it his about 5 psi. if i drive it and then let it sit for 10 minutes it will run perfect from then on untill it's left for a few hours again. Any idea's?

whats R&R?

I have the same prob. my car feels funny when its cold. Its smooth but its like it doesnt feel quick.

But when its warm and the weather is sunny it feels really nice and sweet.

I thought it was just me. i just services my car recently. it was a major service.

Yea i think it's the AFM, i have cleaned it, i have replaced the fuel filter, spark plugs. i plan to change the fuel pump and i have bought a Z32 AFM. So i hope i can get this sorted soon. The other thing it does when it plays up, if you rev it out and keep the revs there it will missfire.

you cant put an z32 on a stock ecu..

sounds lik R&R to me..ive got the same problem..wen could or hot...

i got a afc neo(untuned)..to try lean out my fuel abit..

so i drop the fuel from about 4000-6000rpm..wen R&Rs kick in..

and dependin on wat boost ur running too..

this was mention by SydneyKid

"It has been my experience that RB25's run a little lean down low in the rpm range (Nissan do this for fuel economy and emissions) and a lot rich up high (Nissan do this to protect the engine). So I have to increase the voltage (using the SAFC) up to around 3,000 rpm and decrease the voltage over 5,000 rpm.

The real problem is in the 3,000 to 5,000 rpm range as the engine comes on boost. They really need lots of fuel very quickly in this area. This can mean that you need to increase the voltage (that the ecu sees) over 5.1 volts to get the right A/F ratios. The ecu then goes into engine protection mode, rich and retarded (sounds like a girl I knew once). Past that rpm you can start leaning it out as it runs too rich, so the voltage needs to be turned down under 5.1 volts. The ecu sees this as the engine not needing protection mode any more, no more rich and retarded.

So you get good performance up to 3,000 rpm, then sluggish from 3,000 rpm to 5,000 rpm and then good performance from 5,000 rpm and over. The SAFC may not help this, in fact as explained above, it can in fact make it worse if the tuner is not switched on to this stuff.

With bent afm voltages, the ecu (tricked by the SAFC) also fires the ignition to suite the airflow it THINKS the engine is getting. This is not a good thing as you generally end up with ignition that is too far advanced in some rpm ranges.

The poor tuner has to juggle the SAFC settings, so that the A/F ratios are OK, the ecu doesn't get into rich and retard (engine protection) mode and the ignition timing is not too far advanced so as to cause detonation. My experience (I am not a good tuner) has been that this is full of compromises, sometimes you just can't win and have to reduce the boost level a bit to get even a reasonable compromise.

Keep in mind that this explanation is very simplified to make it fit in a reasonable space, the rpm's used are rough guides only and every car is different. "

but ur answer is aftermarket ecu...

but wat mods u got?

but check the obvious lik plug gapping..clean ur afm with some good electrical cleaner...coil-packs?

hope this helps...

  • 3 weeks later...

I found today that drove it untill the car warmed up. Only a few minutes. and it was playing up as usuall. Then turned the car off for 15 seconds. Started it up and the problem was gone...... Still confused.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...