Jump to content
SAU Community

Recommended Posts

Hey.. thought i'd steal the thread name of the last guy who has HICAS issues. (since it shares my sentiments)

Here's my story (and i hope it's not too confusing)

I took my car to Hyperdrive a while ago and they pointed out a joint in my hicas which has play in it... if you jack the car up, you can rock the wheel diagonally holding front top and bottom right.

I bought a joint from Jap Performance Parts in Ozzy park which (through my description) they thought was the issue.

I then took the car to a 3rd garage (yeah i'm a garage whore), who told me i bought the wrong joint, and that i need the ball joint on the tie-rod of the HICAS arm.

On returning to Jap Performance Parts they told me that the joint in question is not a ball joint but is solid... so now i have no idea what's going on...

here is the "joint" in question:

Joint.jpg

You can kinda see that the rubber boot on it appears to have split.. is this a ball joint? .. could it have play in it even if it isn't? .. could this be moving but the problem be elsewhere?

:O

Link to comment
https://www.sau.com.au/forums/topic/242350-hicas-burn-in-hell-part-2/
Share on other sites

Take the rubber boot off and have a look to see what's going on under there.

Then just go buy a HICAS lock bar. :O

But seriosuly, have a look for yourself, those boots are easy to get on/off... figure out where the problem is, if it's on the HICAS unit, you could get a lockbar and be done with it... or you could have my HICAS unit, it's in my garage. :)

Well i jacked it up on the weekend and took the boot off.. it's most definitely a ball joint under there and it definitely has play in it.

Is one of those Tie Rod's easy to get new or should i go back to JPC and tell him that he was wrong and ask if i can get one from him?

I originally bought a pair of tie rod's (ie the bit you are looking for not the tie rod ends) for my front steering setup as the original mechanic reckonned they were an issue. The only place I found was through nissan spares and they were damn pricey. Ended up being the tie rod ends instead so I have the new inners still wrapped up in my shed (fronts though so no help for you unfortunately).

Talk to brad at WA suspensions. Great bloke, sauwa member and he rectified my suspension problems. He should be able to help you, even take it ther and get a check before you decide to order any bits and ask what he reckons.

Tie rods (i been referring to them as hicas arms) are cheap as. KYP sold me one for 33bux. piece of piss to change but you need a bearing puller to make it easy. i spent 2 days trying to get it off the outer end joint (wheel hub end) and the bearing puller did it in seconds. you also need to drop the rear section of your exhaust and its all there infront of you. then you need a wheel alignment.

if you decide to do it yourself you can borrow my bearing puller cos i know first hand now how much of a pain in the arse it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...